Weld neck flanges B16.5 ASTM A350 150LB

Materials of WN Flanges

Description of THD flange,what about its specification and advantages.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

Equal tee is one type of pipe fittings, also called straight tee which means the branch diameter is same with the main pipe (Run pipe) diameter.

A105 WN flange is a carbon steel flange according to ASME B16.5.STD is represents the thickness of the flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.Flanges have five face types:RF RTJ FF MF TG.

300LB Stainless Steel Flange is always be chosen because of the excellent anti-corrosive function,SS316 is one of commonly used grade for stainless steel.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

What is a weld neck flange and its specification?

ASTM A182 F304 600LB slip on flanges are very popular type of flanges because of the excellent functions and high pressure.ASME B16.47 Series A & B are American Standard for large dimension flanges.According to ASME B16.47 Series A& B,the smallest size of flanges is 22 in.

Carbon Steel: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.
Duplex Stainless Steel: ASTM A182 F51, F53, F44

What is a weld neck flange and what about its dimensions?

The connection method of A182 F11 socket flange is to insert the pipe into the socket of the flange, and then seal it with welding or use a sealing gasket. This connection method is relatively strong and can adapt to the thermal expansion and contraction of the pipe to a certain extent.

ASTM A350 LF2 Blind Flange is a common low-temperature carbon steel material, mainly used in the manufacture of low-temperature and high-pressure forged pipe fittings and flanges.

What is a SW flange and what about its specification.

Detail infoemation of Weld Neck(WN) Flange

Stainless steel weld neck flange is a part widely used in pipeline engineering. The diameter and wall thickness of the pipe at the interface end are the same as the pipe to be welded, and the connection of the pipe is realized by welding.

Reducing pipe (reducing nipple) is a pipe fitting used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joints and eccentric reducing joints

Socket weld flange can socket with the end of pipe,and welding on the pipe.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

All flanges are round disks with holes for bolts around the rim, but the commonalities end there. a projecting flat rim used for strengthening or attachment.

What is a Weld Neck(WN) Flange and what about its specification and advantages.

The bore of the slip on will give ample amount of space for the matching pipe. This allows for enough working space for the welder and fabricator to make the connection.Slip-On flanges are commonly lower in price than weld-neck flange.However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation.

flange type: Weld Neck Flange ( WN),Slip-on Flange (SO), Threaded Flange (THD),Socket Weld Flange (SW),Blind Flange (BL),Lap Joint Flange (LAPJ),Plate flange (PL)

ASME B16.5 SW flange is belong to American Standard for forged flanges,this kind of flange are been used all over the word.Forged flanges are high pressure flanges,the commonly used classes are CL 300,CL 600 for forged flanges.Stainless steel flanges always more expensive than other flanges because of the stainless steel has better functions.

ASTM A350 LF2 is a low temperature carbon steel material, mainly used to manufacture flanges and other connectors. This material has good low temperature performance and corrosion resistance, and is suitable for use in low or ultra-low temperature environments.

Face Type of a WELD NECK flange

ASME B 16.5 2 inch socket weld (SW) flanges are used for small size and high pressure pipe systems.Stainless steel flanges are more expensive than carbon steel flanges because of the better functions.The pressures could be chosen:CL150,CL300,CL600,CL900,CL1500,CL2500.

Stainless steel flange, also called SS flange, it means the material of flange is stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500.

ASME B16.5 flange is a flange made accoding to American matal standaed.Class 150 WN flange is the lowest pressure of flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

Slip-On flanges are commonly lower in price than weld-neck flange.However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation.

Weld Neck Flanges are a very common type of pipe flanges used in various industrial applications. They have a long tapered hub and are often used for high pressure applications.