Threadolet A182 316/316L

What is aHex Nipple and what about its specification and advantages.

High Pressure Steel Pipe Fittings contain buttwelding pipe fittings, socked weld fittings and threaded pipe fittings. Threaded Steel Coupling is a short piece with screw in NPT or BSP ends or one end, which is available in stainless steel, alloy steel and carbon steel. The size range is DN6-DN100. There are various grade of A694 Threaded Coupling, Such as A694 F42 / 46 / 52 / 56 / 65 / 70

hat is a threaded tee,what about its specification and its difference between a elbow.

This is a Pipe fitting with the same size on three sides. The main pipe of these tee is different from the diameter of the branch pipe, and the diameter of the main pipe is larger than that of the branch pipe.

What is a treaded nipple,what about its specification and its difference between coupling.

Especially in high-pressure, high-temperature, large-diameter and thick walled pipes, it is increasingly used, replacing the traditional branch connection method.

What is a threaded tee,what about its specification and its difference between a elbow.

Type: Full and Half Coupling
Shape: Straight and Reducing Coupling
Thread Type: NPT, PT, BSPP, BSPT, PF

This makes a 90° branch and comes in full size or reducing for a straight piece of pipe

Threaded couplings could be divide into full coupling (both ends threaded) and half coupling(one end threaded,the other end welded).Forged pipe fittings dimensions are all in small size,1/8″-4″.

The equal cross is one kind of the pipe cross,  the equal cross means all the 4 ends of the cross are in same diameter.
The reducing cross also is called unequal pipe cross , it is the pipe cross which the four branch ends are not in the same diameters.

Carbon Steel: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.
Duplex Stainless Steel: ASTM A182 F51, F53, F44

The coupling is used to make connection of two pipes. The maiterial is available in stainless steel, alloy steel and carbon steel. The size range is DN6-DN100.

Stainless steel 90 deg threaded elbow is popular because it is easy to install or replace.ASME B16.11 forged fittings are pipe fittings according to American Standard.There are many types fot customers to choose:NPT PT BSPP BSPT PF.

Threaded coupling is used to connect two pipes with threaded connection.Forged steel pipe fittings can divided into SW (socket weld) fittings and THD (threaded) fittings.

SS316L Threaded Pipe fittings provide permanent welded connections for pipes. Threaded Steel Coupling is a short piece with screw in NPT or BSP ends or one end.

The base of the threaded branch pipe stand is the same as that of the butt welded branch pipe stand, but its branch connection is screw connection, which does not require welding. The threaded branch pipe has two pressure classes, 3000 # and 6000 #.

What is a threaded elbow,what about its specification and its advantages.

Threaded elbow and coupling are used thread type to connect the pipes to trsnsport flow in piping system.THD fittings are belong to forged fittings,ASME B16.11 fittings are American Standard for forged fittings.

Carbon Steel A105 Threaded Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Threaded elbow can reduce pipeline stress and pressure drop reduce pipeline stress, reduce pipeline pressure drop, and reduce pulsating power of fluid to pipeline.

Swage nipples are often used in small diameter pipe systems, and are similar to pipes. It is used to allow plumbing to be connected to a water heater or other plumbing.

Threaded Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. 90° Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

There are various types of ASME B16.11 socket-welding fittings, such as Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, Union and Sockolet; while ASME B16.11 threaded fittings can be furnished in product forms of Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, plug and bushing.

The branch pipe stand is also called branch pipe seat, saddle and saddle type pipe joint. Reinforced pipe fittings mainly used for branch pipe connection, instead of branch pipe connection such as reducing tee, reinforcing plate and reinforced pipe section