Threaded Union Threaded Fittings

Especially in high-pressure, high-temperature, large-diameter and thick walled pipes, it is increasingly used, replacing the traditional branch connection method.

Type: Full and Half Coupling
Shape: Straight and Reducing Coupling
Thread Type: NPT, PT, BSPP, BSPT, PF
Size Range: 1/8″ –  4″ / DN6 – DN100

We manufacture and export High Pressure Pipe Fittings. Threaded Coupling is usually packaged by wooden case.

Threaded elbow used thread connection to connect with the pipes.Pipe elbows have three types:THD (threaded),SW (socket weld),BW (butt welded).These elbows used different connections to connect with the pipes in piping system.Class 3000 forged fittings are the most used high pressure fittings.

Threadolet considered to a threaded fitting, and it is manufactured in 3000 and 6000 classes. t typically is in the size range of 1/2″ to 2” and is welded over a hole either drilled or burned in the pipe.

Threaded elbow can reduce pipeline stress and pressure drop reduce pipeline stress, reduce pipeline pressure drop, and reduce pulsating power of fluid to pipeline.

It is used for all kinds of equipment such as paper/pulp, petrochemical, general industrial machinery, shipbuilding, electronic equipment, vehicles, housing, water treatment, etc.

Threaded couplings used thread connection to connect two pipes.Threaded coupling is belong to forged steel fittings.The other type of forged fitting is socket weld fittings.All the forged fittings are high pressure pipe fittings.

Threaded Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. 90° Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

These Stainless Steel Pipe Fittings are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

Threaded Pipe Fittings Specification
Shape: Elbow,Tee, Cross, Coupling, Cap, Swage Nipple, Bushing, Plug, Nipple, Union, Hex Nipple,Threadolet.
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Rating: Class 2000lbs, 3000lbs, 6000lbs
Thread Type: NPT, PT, BSPP, BSPT, PF
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

Threaded coupling is used to connect two pipes with threaded connection.Forged steel pipe fittings can divided into SW (socket weld) fittings and THD (threaded) fittings.

A234 WPB threaded coupling mainly consists of a main body and thread structures at both ends. The main body is usually cylindrical, and its length varies according to different specifications and usage requirements.

High pressure forged steel tee is used for providing branch, it can be divided into equal tee and reducing tee.High pressure tee is used for adding pipe branchs. An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.

Shapes:
Equal：This is a Pipe fitting with the same size on three sides.
Reducing：The main pipe of these tee is different from the diameter of the branch pipe, and the diameter of the main pipe is larger than that of the branch pipe.

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.
The Alloy Steel A182 Threaded Elbow material grade contains ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22.

Pipe Nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings.

Swage Nipple and short joint reducing joint are pipe fittings used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joint and eccentric reducing joint

What is a Threaded nipple and what about its specification and advantages.

Type: Full and Half Coupling
Shape: Straight and Reducing Coupling
Thread Type: NPT, PT, BSPP, BSPT, PF
Size Range: 1/8″ – 4″ / DN6 – DN100

The center lines of the two pipes connected by concentric reducers are on a straight line, mainly used for vertical pipelines; Eccentric reducers are often used in horizontal pipelines

Concentric swage nipple is mainly used for vertical pipeline. eccentric swage nipple is mainly used in horizontal pipelines.

BSP Pipe Fittings Specification:
Type: Elbow /Tee /Cross /Coupling /Cap/Union /Nipple /Plug /Bushing
Material: CS/LOW TEMP CS/PIPELINE STEEL/ALLOY STEEL /SS/ DUPLEX SS
Standard: ASME B16.11, BS3799
Size: 1/8IN-4IN/DN6-DN10
Rating: 2000lbs,3000lbs,6000lbs
British Standard Pipe Parallel (BSPP)

In general, carbon steel pipe fittings and flanges are widely used for applications which do not require materials with higher resistance to corrosion such as stainless steel and alloy steel. Carbon Steel Fittings is primarily used across piping systems for its hardness, moderate to good tensile strength and inexpensiveness.

Used for all sorts of media: chemical substances, petrochemical products, liquefied gas – especially in loading/unloading applications. There are also couplings intended for highly aggressive chemical substances, lined with ECTFE – a polymer resistant to chemicals.

 NPT A105 bushing is mainly used to connect two pipes of different diameters in the pipeline system or to correct the error in the pipeline installation. It is usually made of A105 carbon steel, has high strength and good corrosion resistance, and can withstand high working pressure.

Threadolet has the same basic design as a weldolet. However the main difference is the fitting has a female threaded connection to link to the branch connection. This makes a 90° branch and comes in full size or reducing for a straight piece of pipe