Threaded one end and both ends nipples ASME B16.11 SCH10-SCH160

Stainless steel threaded pipe fittings are very popular forged fitttings because of the excellent anti-corrosion function.ASME B16.11 forged pipe fittings are SW pipe fittings and THD fittings.There are threaded pipe fittings in the picture.SHANGHAI ZHUCHENG PIPE FITTINGS MANUFACTURING CO LTD is an excellent pipe fittings and flanges supplier from China.

Hex head bushing is a commonly used bushing,there is also has flush bushing.Bushing is belong to forged fittings and it only available in threaded type.Threaded pipe fittings are easy to Installation and removal.

The overall shape of the A105N hex head plug is a combination of a hexagonal head and a plug body. The hexagonal head design is convenient for operation with tools such as wrenches, and can provide better torque transmission, so that the tube plug can be tightened or loosened.

The branch pipe stand is also called branch pipe seat, saddle and saddle type pipe joint. Reinforced pipe fittings mainly used for branch pipe connection, instead of branch pipe connection such as reducing tee, reinforcing plate and reinforced pipe section

Type: Full and Half Coupling
Shape: Straight and Reducing Coupling
Thread Type: NPT, PT, BSPP, BSPT, PF
Size Range: 1/8″ – 4″ / DN6 – DN100

It is used for all kinds of equipment such as paper/pulp, petrochemical, general industrial machinery, shipbuilding, electronic equipment, vehicles, housing, water treatment, etc.

High pressure forged steel tee is used for providing branch, it can be divided into equal tee and reducing tee.High pressure tee is used for adding pipe branchs. An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.

Threaded coupling is used to connect two pipes with threaded connection.Forged steel pipe fittings can divided into SW (socket weld) fittings and THD (threaded) fittings.

Carbon steel pipe fittings are used in many applications because of its great excellent functions.Carbon steel pipe fittings can manufactured as THD (threaded) fittings,SW (socket weld) fittings and (BW) butt welded fittings.The specifications are in the content below.

The base of the threaded branch pipe stand is the same as that of the butt welded branch pipe stand, but its branch connection is screw connection, which does not require welding. The threaded branch pipe has two pressure classes, 3000 # and 6000 #.

CL3000 threaded couplings are the most used pressure of couplings,there are still CL2000 and CL6000 to choose.ASTM A105 forged pipe fittings are usually be chosen because of the affordable price and great functions.

Concentric swage nipple is mainly used for vertical pipeline. eccentric swage nipple is mainly used in horizontal pipelines.

Full Coupling: Both ends of the full thread coupling are threaded. Half Coupling: One end of a half thread coupling is threaded and the other end is welded.

Shapes:

Concentric: Concentric swage nipple is mainly used for vertical pipeline.

Eccentric: eccentric swage nipple is mainly used in horizontal pipelines.

The basic difference between couplings and unions in use is that couplings connect pipes to pipes or pipes to bends.Unions are used to connect and disassemble part of the piping system for maintenance or replacement.

Bending radius less than or equal to 1.5 times of pipe diameter belongs to elbow, and bending radius greater than 1.5 times of pipe diameter belongs to elbow

A combination of pipe nipples are recommended for low-pressure discharge and suction service for various compatible liquids and not for compressible products like air, nitrogen or steam. 

They have applications in many industries,including chemical processing, petroleum, refining, marine waste treatment, utilities / power generation, industrial equipment, natural gas compression and distribution industries. Tee pipe is also recommended for industrial equipment hydrodynamic system

Weldolet, an economical butt-weld branch connection, is designed to minimize stress concentrations and provide integral reinforcement. manufactured to meet your specific reinforcement requirements.

What is a plug,what about its specification and its difference between a caps.

Steel tee is a T-shaped pipe fitting with three branch pipes. It is used to divide pipes to adjust flow and change direction.

Threaded union is easy to install and disassemble so that it is popular in piping system.Threaded fitting used thread type to connect with pipes,threaded fittings have many pressures:2000,3000,6000.

There are various types of ASME B16.11 socket-welding fittings, such as Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, Union and Sockolet; while ASME B16.11 threaded fittings can be furnished in product forms of Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, plug and bushing.

This is a Pipe fitting with the same size on three sides. It is used to change the direction of the pipe so that the pipe is 90 degrees perpendicular to the pipe.

Thread Types:

NPT  PT  BSPP  BSPT  PF

Swage nipples are often used in small diameter pipe systems, and are similar to pipes. It is used to allow plumbing to be connected to a water heater or other plumbing.