Threaded pipe fittings

F316 threaded  caps are components used to close the ends of stainless steel pipes or pipe fittings, and achieve the functions of sealing and fixing through threaded connection.

The overall shape of the A105N hex head plug is a combination of a hexagonal head and a plug body. The hexagonal head design is convenient for operation with tools such as wrenches, and can provide better torque transmission, so that the tube plug can be tightened or loosened.

Equal tees are available in sizes from half an inch to 48 inches (or larger) and in seamless and welded execution (seamless up to 24 inches, welded for tee sizes above 24 inches).

Forged threaded elbows are very common in chemical, oil refining, petrochemical and other industries, and are also used in some other industries.

The basic difference between couplings and unions in use is that couplings connect pipes to pipes or pipes to bends.Unions are used to connect and disassemble part of the piping system for maintenance or replacement.

What is a treaded nipple,what about its specification and its difference between coupling.

What is aHex Nipple and what about its specification and advantages.

What is a Threaded Coupling,what about its specification and its advantages.

What is a treaded nipple,what about its specification and its difference between coupling.

What is a threaded elbow,what about its specification and its advantages.

What is a threaded tee,what about its specification and its difference between a elbow.

What is a treaded nipple,what about its specification and its difference between coupling.

What is a plug,what about its specification and its difference between a caps.

What is a Threaded nipple and what about its specification and advantages.

What is aHex Nipple and what about its specification and advantages.

Double threaded Swage Nipplet:Swage Nipple with external threads at both ends. The screw plug is used to plug the external thread pipe fittings at the end of the pipe, including square head pipe plug, hexagonal pipe plug, etc.

Swage Nipple and short joint reducing joint are pipe fittings used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joint and eccentric reducing joint

In small diameter pipes (below DN50), reducing nipples are also often used to replace reducing joints for pipe reducing. Reducing nipples also have concentric and eccentric parts

The weld groove of the branch abutment is a single-sided V-shaped groove. It can be determined that the weld is a combination of butt weld (groove weld) and fillet weld.

ASTM A105 Swage Nipple is a type of carbon Steel Pipe Fittings and commonly used for connection two pipes with different diameters. It belongs to pipe reducers and are used in small pipe size more often.

Swage niples belongs to pipe reducers and are used in small pipe size more often. It has two types: Concentric Swage Nipple and Eccentric Swage Nipple.

Concentric swage nipple is symmetrical, both ends are aligned along the center, used in vertical pipes, Eccentric swage nipple is not symmetrical, ends are off center of one another and used in horizontal pipes.

Equal tee is one type of pipe fittings, also called straight tee which means the branch diameter is same with the main pipe (Run pipe) diameter.

Both equal tee and reducing tee have three branches that usually is T-shaped, they provide 90 degree branches and change fluid direction. ASME B16.9 Buttweld tees are widely used in pipe convey. They are very common in industrial applications such as oil and gas transmissions, water treatment system, power station, chemical industry and engineering.

90° Steel Pipe Elbow is the most commonly used elbow type in pipe system with the function to change the direction of fluid in 90 degree. It connects pipes with same or different diameter.

The diameter range of reducer and swage nipple is different. Generally speaking, pipe reducer measures from 1/2” to 80”, and swage nipple is available within 12”.