ASME B16.11 socket weld tee is a pipe fitting mainly used in pipeline systems. It has three interfaces, one of which is a socket and the other two are spigots. It is connected to other pipes or pipe fittings by means of a socket connection. This connection method makes the installation and maintenance of the pipeline system relatively convenient.
The carbon content of carbon structural steel is about 0.05% ~ 0.70%, and individual can be as high as 0.90%. A105 is ASTM Standard number, where A stands for ordinary carbon structural steel.
Socket welded tee are generally suitable for pipes with a nominal diameter of NPS 2 or less.
What is a straight and reducing tee and Dimensions and Standards
An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee. A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.
Socket weld pipe fittings is a family member of forged steel fittings, which used for small bore pipes and piping systems (generally below 4 inches). We usually manufacture them according to ASME B16.11 standard.
ASTM A106 lateral tee is a carbon steel pipe fitting which plays an important role in pipe systems.Class 3000 pipe fittings are very popular because the pressure can be manufacture in both THD fittings and SW fittings.
CL3000 carbon steel lateral tees are not a common used fittings but have an important role in pipe systems.Forged socket weld fittings are always be chosen because of the excellent leak-proof function.These lateral tees have run pipe with 45 deg from main pipe.
What is a Butt weld TEE and what about its difference between reducing tee .
What is a latera tee and the difference between a wye and a lateral?
A Reducing Tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes. In this, the branch port size is smaller than the other ports of the run.
High pressure tee is used for adding pipe branchs. An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
Socket weld 45 deg lateral tees are belong to pipe tees,but is a special type of pipe tees.These lateral tees could change the direction in 45 degree of the pipes.
CL3000 socket weld tees are the most used pressure pipe fittings because of the wide using range.ASME B16.11 forged pipe fittings are including SW and THD fittings.
Socket Weld Tee Material: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Threaded fittings are available in pressure ratings Class 2000, 3000, and 6000; Socket welding fittings are available in pressure ratings Class 3000, 6000, and 9000. Generally, both fittings size range is 1/8″- 4″or DN6-DN100.
A Socket Weld Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. Once correctly inserted, fillet type sealing welds are applied to join the pipe to the fitting.
Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.
SW tee and elbow are both socket weld fittings used in piping system.These fittings used to connect the pipes and transport flow. Shanghai Zhucheng is an excellent SW fittings supplier who supplys high quality pipe fittings and flanges for years.
Class 3000 SW tee is a commonly used socket weld fitting.There are many pressures for SW fittings:3000,6000,9000.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.
SW tee can socketed with the pipes and welding with the pipes.ASME B16.11 fittings are forged fittings according to American Standard.Tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.
Carbon steel tee is the most used tees because of the great material.Shanghai Zhucheng is an excellent pipe fittings supplier who supplys high quality pipe fittings and flanges for years.Carbon steel fittings are used in many applications because of its great excellent functions.
Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is the reducing tee can reduce the flow in the piping system.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.
Stainless steel tee has two types:Equal Tee and Redcuing Tee.These two types of tees have same functions,the only difference can reduce the flow in the piping system.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.
