Forged Steel Flange

150LB SO Flange is the lowest pressure flange in flanges.High Pressure Forged Flange have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

A weld neck flange consists of a circular fitting with a protruding rim around the circumference. Generally machined from a forging, these flanges are typically butt welded to a pipe. The rim has numerous holes drilled into it that enables the flanged to be attached to a bolted flange.

ASME B16.5 flange is a flange made accoding to American matal standaed.Class 150 WN flange is the lowest pressure of flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

A105 WN flange is a carbon steel flange according to ASME B16.5.STD is represents the thickness of the flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.Flanges have five face types:RF RTJ FF MF TG.

Class 150 WN flange is the lowest pressure flange in all the flanges,langes also have many pressures:CL300, CL600, CL900, CL1500, CL2500.ASTM A105 is the matal standard for forged flanges and fittings.

Class 600 WN flange is a high pressure flange.Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.ASME B16.5 is the American Standard for flanges.Flanges have five face types:RF RTJ FF MF TG.

WN flange is a commonly used type of flanges,ASMT A150 forged flange is carbon steel flange according to American Standard.Flanges have many types:WN,SO,SW,THD,LAPJ,BL.

Class 1500 SO flange Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.Flanges have five face types:RF RTJ FF MF TG. Slip on flanges can slip on the pipes and welding with the pipes.

Class 600 WN flange is a high pressure flange used in piping system.ASTM A350 LF2 is represents to low temperature carbon steel in American Metal Standard.Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.

Slip on flange also named as SO flange. SO flanges slip over pipes and are designed to bit slightly bigger on the inside than the pipe. They connect to the pipe through a fillet weld at the flange top and bottom.

It is used to insert the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s outer diameter, pipe and flange could be connected by lap welding at the top and bottom of the flange.

The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange. The bore of the slip on will give ample amount of space for the matching pipe.

The bore of the slip on will give ample amount of space for the matching pipe. This allows for enough working space for the welder and fabricator to make the connection.Slip-On flanges are commonly lower in price than weld-neck flange.

Slip-On flanges are commonly lower in price than weld-neck flange.However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation.

A flange is a category of gasket made to fix two sections of pipe together, or act as a removable plug at the end of a single pipe. All flanges are round disks with holes for bolts around the rim, but the commonalities end there. a projecting flat rim used for strengthening or attachment.

Flange provides a long tapered hub for welding to pipes , it is used in high pressure systems and suitable for both cold and hot temperatures.

All flanges are round disks with holes for bolts around the rim, but the commonalities end there. a projecting flat rim used for strengthening or attachment.

Forged Steel Flange are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe.

Steel Flange Fittings connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

All flanges are round disks with holes for bolts around the rim, but the commonalities end there. a projecting flat rim used for strengthening or attachment.

Flange connection is an important connection method in pipeline construction. A flange is a category of gasket made to fix two sections of pipe together, or act as a removable plug at the end of a single pipe.

Flange connection is to fix two pipes, pipe fittings or equipment on a flange first, and then Flange pads are added between the flange plates and fastened together with bolts to complete the connection

Socket weld flange can socket with the end of pipe,and welding on the pipe.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Spiral wound gasket (SWG) is a fitting used with flanges.ASME B16.20 is the American Standard for gasket.

Stainless steel flange is popular because stainless steel has great anti-corrosive function.Flanges can be many types:WN,SO,SW,THD,LAPJ,BL.These flanges use different connections to connect with the pipes.Shanghai Zhucheng is a high quality manufactory who can supply all types of flanges.

ASME B16.5 SW flange is belong to American Standard for forged flanges,this kind of flange are been used all over the word.Forged flanges are high pressure flanges,the commonly used classes are CL 300,CL 600 for forged flanges.Stainless steel flanges always more expensive than other flanges because of the stainless steel has better functions.

SW flange can be used in many applications in piping systems.SW Flanges are forged flanges.Socket weld flange has many classes:150LB, 300LB, 600LB, 900LB, 1500LB, 2500LB.Stainless steel flanges have better functions than other flanges which made from carbon steel or alloy steel.

Socket weld (SW) flange is a type of forged flanges,these flanges can socket and wedled with pipes,you could find the flanges specifications in the content below.Stainless steel flanges are popular because the stainless steel has great corrosion resistance so that these flanges can used in some corrosive environments.

The purpose of these is to block off a section of pipe or a nozzle on a vessel that is not used. (A nozzle is typically a pipe coming out of a vessel and is usually flanged so it can be connected to valves or piping). Many times a nozzle will be blanked off with a blind flange for pressure tests in a plant, or simply because the customer does not need all the nozzles that were supplied on the tank.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.