Swage Nipple: Carbon Steel, 1/2 in x 1/4 in Pipe Size, Male NPT x Male NPT

We are manufacturer of High Pressure Pipe Fittings from China. Threaded fittings are available in pressure ratings 2000LB, 3000LB, and 6000LB; Threaded Coupling Dimension is 1/8″ –  4″ / DN6 – DN100.

Shanghai Zhucheng is well known manufacturer of MSS SP-83 Union, consists of three parts: a nut, a female end and a male end. Our offered Threaded Pipe Union similar to a coupling, allows the convenient future disconnection of pipes for maintenance or fixture replacement. Threaded Reducing Union makes easy connection and disconnection, multiple times whenever we need.

Threaded elbow can reduce pipeline stress and pressure drop reduce pipeline stress, reduce pipeline pressure drop, and reduce pulsating power of fluid to pipeline.

ASME B16.11 forged fittings are popular because of the famous American Standard and the variety products.Socket weld (SW) fittings and threaded (THD) fittings are both forged fittings.Stainless steel pipe fittings are always chosen in corrosive and chemical environments.

What is a threaded tee,what about its specification and its difference between a elbow.

MSS SP-97 Threadolethas the outstanding advantages of safety and reliability, cost reduction, simple construction, improved medium flow channel, series standardization, and convenient design and selection

Weldolet, an economical butt-weld branch connection, is designed to minimize stress concentrations and provide integral reinforcement. manufactured to meet your specific reinforcement requirements.

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Threadolet has the same basic design as a weldolet. However the main difference is the fitting has a female threaded connection to link to the branch connection. This makes a 90° branch and comes in full size or reducing for a straight piece of pipe

The branch pipe stand is also called branch pipe seat, saddle and saddle type pipe joint. Reinforced pipe fittings mainly used for branch pipe connection, instead of branch pipe connection such as reducing tee, reinforcing plate and reinforced pipe section

High Pressure Steel Pipe Fittings contain buttwelding pipe fittings, socked weld fittings and threaded pipe fittings. Threaded Steel Coupling is a short piece with screw in NPT or BSP ends or one end, which is available in stainless steel, alloy steel and carbon steel. The size range is DN6-DN100. There are various grade of A694 Threaded Coupling, Such as A694 F42 / 46 / 52 / 56 / 65 / 70

High pressure forged steel tee is used for providing branch, it can be divided into equal tee and reducing tee.High pressure tee is used for adding pipe branchs. An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.

Threadolet considered to a threaded fitting, and it is manufactured in 3000 and 6000 classes. t typically is in the size range of 1/2″ to 2” and is welded over a hole either drilled or burned in the pipe.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

The threaded pipe union is similar to the coupling and can be flexibly disassembled when it needs to be repaired or replaced. The reducing threaded union is easy to disconnect and link, and can be operated multiple times.

Threaded Pipe Fittings Specification
Shape: Elbow,Tee, Cross, Coupling, Cap, Swage Nipple, Bushing, Plug, Nipple, Union, Hex Nipple,Threadolet.
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Range: Class 2000lbs, 3000lbs, 6000lbs
Thread Type: NPT, PT, BSPP, BSPT, PF
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

Forged threaded elbows are very common in chemical, oil refining, petrochemical and other industries, and are also used in some other industries.

Pipe Nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings.

Hex head bushing is a commonly used bushing,there is also has flush bushing.Bushing is belong to forged fittings and it only available in threaded type.Threaded pipe fittings are easy to Installation and removal.

What is a Threaded Coupling,what about its specification and its advantages.

The weld groove of the branch abutment is a single-sided V-shaped groove. It can be determined that the weld is a combination of butt weld (groove weld) and fillet weld.

Threaded pipe fittings provide permanent welded connections for pipes. Threaded joints probably represent the oldest method of joining piping systems. Same as Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.
They are available in three pressure ratings: 2000lbs, 3000lbs and 6000lbs.

90° Steel Pipe Elbow is the most commonly used elbow type in pipe system with the function to change the direction of fluid in 90 degree. It connects pipes with same or different diameter.