Steel Pipe Tee Carbon Steel Pipe Fittings

Equal butt weld elbow is used to change the direction of the flow in piping system.SCH 80 is a commonly used wall thickness for butt welded fittings,the other commonly used wall thickness is SCH 40.

Buttwelding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS

3/4in BW tee is a normally used fitting in butt welded fittings.A403 WP321 is a grade for stainless steel.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

BW 90 degree elbow is the most commonly used type of elbows.There is also 45 deg elbow.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.You could find the steel pipe elbow specifications in the connent below.

Carbon steel tee is the most used type in all tees because carbon steel has great functions and affordable price.Galvanized pipe fittings has better anti-corrosive function than normal carbon steel pipe fittings,galvanized fittings have similar functions as stainless steel fittings,but the price is cheaper than stainless steel fittings.

45° Pipe Elbow is also known as “45 bends or 45 ells”. The 45° pipe elbow is used to connect tubes at a 45° pipe angle. As the name suggests, this is a pipe fitting device which is bent in such a way to produce 45° change in the direction of flow of the fluid/gas in the pipe.

The pipes cannot appreciate because of what the external arrangement of the pipe reducer seems but the flow of the pipe is changed by the internal width conical transition arrangement. It can be axially shifted and externally reconfigured to offer more efficient reducer connection. Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

0 degree elbow, also called “90 bends or 90 elbows”, are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows.

Butt Weld Fittings include elbows, tees, cross, caps and reduces. These fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule. Buttweld fittings are manufacture by seamless or welded pipe and are formed to get the shape of elbows, tees and cross etc.

BW 3D elbow is belong to Butt welded (BW) elbows.3D means the radius is 3 times of dimensions long.A234 WPB is the most used grade of carbon steel butt welded (BW) fittings according to American Standrad.The degree of the butt welded 3D elbow can be 45 deg, 90 deg and 180 deg.

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on.
In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

The lap joint stub end is required when attach the lap-joint flange to the piping system. The stub end and lap-joint flange assembly are used mainly in piping systems that necessitate frequent dismantling for inspection or routine maintenance.

DN1400 BW elbow is a very large size in pipe fittings.The size of fittings are important for piping systems.Carbon steel fittings are used in many applications because of its great excellent functions.

Carbon BW tee is wide used in many applications because welded connection can provide permanent connection.Schedule XS is wall thickness of this tee in the picture.In addition,the commonly used wall thicknesses:SCH40, SCH80.

Elbow is a fitting device which is bent in such a way to produce 90 degree change in the direction of flow of the content in the pipe.

Steel pipe elbow is a key part in a pressure piping system used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of 45 degree or 90 degree. This change in fluid flow direction adds pressure losses to the system due to impact, friction and re-acceleration.

Stainless 90 deg elbow has better anti-corrosive function than other material elbows.90 degree elbow can be two types: LR (long radius) and SR (short radius).Elbows can also be 45 degree,but 45 deg elbow only has LR type.

What is a CONCENTRIC REDUCER and what about its specification and advantages.

BW equal tee is a commonly used tee in many applications.There is also reducing tees to choose.These tees have same functions,the only difference is the reducing tees can reduce the flow in the pipe system.There are the tee specifications in content below.

45 degree elbows have same functions to 90 degree elbows,the only different is 45 deg elbow changes the direction of pipes in 45 deg while the 90 deg elbow changes the direction in 90 deg.BW pipe fittings are popular as its strong and permanent connection.

ASME B16.9 BW 90 elbow is pipe fitting manufactured according to American Standard.ASME B16.9 is American Standard of butt welded fittings.There is BW elbow in the picture,you could find the specification and dimensions below.

A234 WP22 elbow is a alloy steel pipe fitting used in piping systems.A234 WP22 is represents alloy steel butt welded fittings in American Standard.Elbows can manufactured as 45 and 90 deg.These elbows have similar functions,the only difference is 45 degree elbow can changes the direction of pipes in 45 degree while 90 degree elbow can changes in 90 deg.

What is a straight and reducing tee and Dimensions and Standards

The connection methods of elbow and pipe include: direct welding (the most common method), flange connection, hot melt connection, electric fusion connection, thread connection and socket connection