Steel Pipe Reducer Concentric Reducers

Steel pipe bend two pipes into a certain angle and connects them together to change the direction of the pipe. it could be bend directly from a finished pipe with cold bending processes, to different degrees.

BW tee is a commonly used fittings in BW fittings.Tees can also be threaded (THD) and socket welded (SW) tees to used in many different applications.Shanghai Zhuangcheng is an excellent pipe fittings manufacturer who can supply high quality pipe fittings in China.

The connection methods of elbow and pipe include: direct welding (the most common method), flange connection, hot melt connection, electric fusion connection, thread connection and socket connection

Carbon Steel Pipe Fittings Elbow is a most common type of CS fitting used to join pipe or tubing to allow a change of direction, usually a 90° or 45° angle, Elbows ends may be machined for butt welding , threaded , or socketed

Carbon steel elbows are the most commonly used elbows in all the types and material elbows.Large dimensions elbow is butt welded fitting,you can find the butt welded fittings specification below.

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

What is a 90° pipe elbow and what its application

Concentric reducers are beneficial to use where different ratings and to wear protection is required in conveying between flanges or pipes. nd the pipe is connected through conical transition section on the same axis.

What is a steel pipe tee and what about its standard

Butt welded cross is pipe fitting used to transport the flow in piping systems.BW cross can connect four pipes vertically with welded connection.Cross can be two types:Equal and Reducing.These crosses have similar functions,but reducing tees can reduce the flow while equal tees can not.

90 deg elbow is the most used degree in elbows,.Butt welded fittings including BW elbows which used welded connection to connect with pipes.There is also 45 degree elbows.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

ASME B16.9 BW tee is a butt welded pipe fitting according to American Standard.Carbon steel fittings are used in many applications because of its great excellent functions.Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

The pipes cannot appreciate because of what the external arrangement of the pipe reducer seems but the flow of the pipe is changed by the internal width conical transition arrangement. It can be axially shifted and externally reconfigured to offer more efficient reducer connection. Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

10in equal elbow is used to transport flow in piping system.A234 WPB is the most used grade for carbon steel butt welded fittings.Elbows can be 90 degree and 45 degree.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

The function of an end cap is to block off the end of a line a piping system, This is achieved by placing the end cap over the open line and welding around the point.

Stainless 90 deg elbow has better anti-corrosive function than other material elbows.90 degree elbow can be two types: LR (long radius) and SR (short radius).Elbows can also be 45 degree,but 45 deg elbow only has LR type.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Carbon steel tee is a commonly used tpye of tees.This is butt welded (BW) carbon steel tee in the picture.it can welded with pipes to achieve permanent connection.Equal tee only can change the direction of the pipes while reducing tee can also reduce the flow of the fluids or gas.

45 deg elbow is a type of elbows.These elbows have similar functions to 90 degree elbow,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.Shanghai Zhucheng is an excellent stainless steel pipe fittings supplier who supplys high quality pipe fittings and flanges for years.

Steel pipe tee is a pipe fitting used to tansport the flow in the piping system.Carbon steel fittings are used in many applications becasue of its great excellent functions.

Reducing tee is a commonly used fittings to branch the pipes and reduce the flow in the piping systems.Large dimension is for butt welded fittings.ASME B16.9 pipe fittings are BW fittings according to American Standard,the size range for the ASME B16.9 fittings is 1/2″-80″.

This kind of elbow is classified by angle, and 45 degree elbow and 180 elbow is also very popular. And steel pipe elbow is also available in 60 degree, 30 degree and other special angle according to practical needs.

2”90°stainless steel elbow is a commonly used pipe fitting in the pipeline system. It is mainly used to change the direction of the pipeline, make the pipeline turn 90°, and connect two pipes with the same or different nominal diameters.

Steel pipe tee has three branches that can change fluid direction. It has T-shaped or Y-shaped, and include Equal Tee and Reducing Tee (Reducer Tee). Steel tee is widely used in pipe networks for convey liquids and gases.

90 deg stainless steel elbow is a popular type of elbows.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.Shanghai Zhucheng is an excellent pipe fittings manufacturer who supplys high quality pipe fittings and flanges for years.