Stainless Steel Tee Reducing Tee

Steel pipe tee is a pipe fitting used to tansport the flow in the piping system.Carbon steel fittings are used in many applications becasue of its great excellent functions.

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

The body of the branch abutment is made of high-quality forgings, which are made of the same materials as the pipes, including carbon steel, alloy steel, stainless steel, etc. The branch pipe seat and the main pipe are welded

A234 WPB Carbon Steel Buttweld 90 Deg Elbow’s usage

12in concentric reducer is a normal size pipe fitting that can used for many applications.SCH 80 is a commonly used wall thickness for BW fittings.There are two types of reducer:concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

Carbon steel reducer is a commonly used BW fitting.Butt welded pipe fittings used welded connection to connect with pipes in piping systems.These BW fittings are popular because of the strong and permanent connection.Carbon steel is the most used material in many applications because of the great functions and affordable price.

A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Elbow connectors can link pipes to avoid water leakage and air leakage between pipes.

BW 90 deg elbow is the most used type of elbows in many industries.Schedule 80 is represents the wall thickness of the butt welded fittings.It is a commonly used wall thickness.another wall thickness is SCH 40.

Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree.

Carbon steel tee is a commonly used tpye of tees.This is butt welded (BW) carbon steel tee in the picture.it can welded with pipes to achieve permanent connection.Equal tee only can change the direction of the pipes while reducing tee can also reduce the flow of the fluids or gas.

Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is the reducing tee can reduce the flow in the piping system.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Pipe crossing is used where four pipes intersect. The cross pipe may have one inlet and three outlets, or three inlets and one outlet. The diameter of the outlet and inlet can be the same or different.

A equal tee’s usage,dimension and features.

Clean the steel pipe elbow body and wrap the polyethylene tape on it with adhesive. Usually the thickness of coating is 2mm. They are used in the underground pipeline system. Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D.

Carbon Steel Pipe Fittings Elbow is a most common type of CS fitting used to join pipe or tubing to allow a change of direction, usually a 90° or 45° angle, Elbows ends may be machined for butt welding , threaded , or socketed

Concentric Reducer (COC Reducer),is one type of BW reducer.The other type is Eccentric Reducer (ECC Reducer).The two types reducers can meet different demands,You could find the “Concentric VS Eccentric” below to learn the usages for these two types reducers.

90 deg SR (short radius) elbow is a type of BW elbows,90 degree elbow also has LR (long radius) type.Shanghai Zhucheng has expericenced pipe fittings factory which can provide high quality pipe fittings and forged flanges.

The reducing tee has two outlets cut at 90 degrees with the main pipe, and the size of the branch pipe is smaller than the port of the pipeline. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories

90 degree steel pipe elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. It is the common degree in all the pipeline systems and used most in all different degree of elbows

Concentric reducers will change kindly between the pump and piping， Concentric reducers are used to connect pipe segments or pipe segments on the same axis.

It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter. Therefore, this kind of steel elbow is often used when space is not enough.A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

The function of an end cap is to block off the end of a line a piping system, This is achieved by placing the end cap over the open line and welding around the point.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

Steel Pipe Elbow is the most common pipe fitting that changes the direction of the pipeline. It plays a important role in the piping system.

What is a steel pipe tee and what about its standard

usage,specification of a equal tee and ite difference between a reducing tee.

The long radius is used most commonly, and it is also the default radius. When it is the place with the high pressure or the high flow rate, the long radius elbow is usually used. If the resistance requirements of the solid transmission pipeline are strict, the larger radius elbows will be used.