stainless steel pipe flanges China SS Flange Manufacturer

Large diameter flat welding flange has less high-pressure suitability compared to its weld neck counterpart. The basic ring style is suitable for the occasion of low pressure. The butt weld category of the flange is known as a weld neck flange. It suits the occasion of high temperature and pressure as defined in the ASME B16.47 code.

Equal tee is one type of pipe fittings, also called straight tee which means the branch diameter is same with the main pipe (Run pipe) diameter.

The connection method of A182 F11 socket flange is to insert the pipe into the socket of the flange, and then seal it with welding or use a sealing gasket. This connection method is relatively strong and can adapt to the thermal expansion and contraction of the pipe to a certain extent.

A182 F304 forged flanges are stainless steeel flanges,ASME B16.5 SW flanges are socket weld flanges following American Standard specifications.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

The descipton ,specification ,and advantages of a weld neck flange.

Detail infoemation of Weld Neck(WN) Flange

Materials of WN Flanges

flange type: Weld Neck Flange ( WN),Slip-on Flange (SO), Threaded Flange (THD),Socket Weld Flange (SW),Blind Flange (BL),Lap Joint Flange (LAPJ),Plate flange (PL)

Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe.

Class 600 WN flange is a high pressure flange.Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.ASME B16.5 is the American Standard for flanges.Flanges have five face types:RF RTJ FF MF TG.

Blind flanges are used to seal the end of piping systems or pressure vessel openings.

It is used to insert the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s outer diameter, pipe and flange could be connected by lap welding at the top and bottom of the flange.

Class 1500 SO flange Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.Flanges have five face types:RF RTJ FF MF TG. Slip on flanges can slip on the pipes and welding with the pipes.

Socket weld (SW) flange is a type of forged flanges,these flanges can socket and wedled with pipes,you could find the flanges specifications in the content below.Stainless steel flanges are popular because the stainless steel has great corrosion resistance so that these flanges can used in some corrosive environments.

CL 600 slip on flanges are commonly used type of flanges.ASTM A182 F316L is a popular grade for stainless steel.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flanges can used over 50 years.

What is a Socket Weld Flange,what abut its specification and advantages

Forged Steel Flange are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe.

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

ASTM A105 threaded fittings is commonly used carbon steel grade which is used to manufacture forge piping components such as forged fittings and flange of small diameter piping, generally for piping whose nominal diameter is NPS 2 or smaller.

The smooth transition between the flange and the hub combined with the strength of the butt weld joint, allows the flange to be used in extreme conditions of cyclic loading, bending and temperature fluctuations.

What is a Weld Neck Flange and its 2 different shapes

All flanges are round disks with holes for bolts around the rim, but the commonalities end there. a projecting flat rim used for strengthening or attachment.

Steel Flange Fittings connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

Flange connection is an important connection method in pipeline construction. A flange is a category of gasket made to fix two sections of pipe together, or act as a removable plug at the end of a single pipe.

Slip-On flanges are commonly lower in price than weld-neck flange.However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation.

What is a weld neck flange and what about its dimensions?

Reducing pipe (reducing nipple) is a pipe fitting used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joints and eccentric reducing joints

A flange can be defined as a method that helps in connecting pipes, valves, etc., to form a full piping system. There are six flange classes ranging from #150 to #2500. Governed by B 16.5 standards, the ASME B16. 5 Class 300 Flange provides a pressure capacity of 300Lb.

ASME B16. 5 pipe flanges: Weld Neck Flange ( WN),Slip-on Flange (SO), Threaded Flange (THD),Socket Weld Flange (SW),Blind Flange (BL),Lap Joint Flange (LAPJ),Plate flange (PL)