Stainless Steel Lap Joint Flange

Steel Flange Fittings connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

The equal cross is one kind of the pipe cross,  the equal cross means all the 4 ends of the cross are in same diameter.
The reducing cross also is called unequal pipe cross , it is the pipe cross which the four branch ends are not in the same diameters.

ASME B16.5 SW flange is belong to American Standard for forged flanges,this kind of flange are been used all over the word.Forged flanges are high pressure flanges,the commonly used classes are CL 300,CL 600 for forged flanges.Stainless steel flanges always more expensive than other flanges because of the stainless steel has better functions.

Material Grade: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.

A182 F316‌ lap joint flange uses flanges, steel rings, etc. to put the flange on the pipe end, so that the flange can move on the pipe end. The steel ring or flange is used as a sealing surface, and the flange is used to press them tightly.

A105 WN flange is a carbon steel flange according to ASME B16.5.STD is represents the thickness of the flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.Flanges have five face types:RF RTJ FF MF TG.

An assembly with limited space may be an instance in which a socket weld is selected, provided the pressure class is comparatively low and the fluid is not corrosive or for extremely high temperature service.

Stainless steel lap joint flange is a flange connection component, which consists of a flange, a flanged short section or a butt welding ring. Among them, the flange is made of stainless steel, which has good corrosion resistance, heat resistance and other properties.

A182 F304 slip on flange include flanges, bolt holes and sealing surfaces. The flange is a flat ring structure with an outer diameter larger than the outer diameter of the pipe connected to it. The bolt holes are evenly distributed on the flange and are used to install bolts to connect two flanges.

Carbon steel flange, that is, the body material is carbon steel plate or end flange connection. The flanges containing carbon steel are called carbon steel flanges. Common materials are carbon steel ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH. Besides carbon steel flanges, we also supply alloy steel flanges and stainless steel flanges .

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

Slip on flange, also called SO flange. It’s a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be directly connected to equipment or pipe by fillet weld at the top and bottom of the flange. It is used to insert the pipe into the inner hole of the flange.

What is a weld neck flange and its specification?

Stainless steel flange is popular because stainless steel has great anti-corrosive function.Flanges can be many types:WN,SO,SW,THD,LAPJ,BL.These flanges use different connections to connect with the pipes.Shanghai Zhucheng is a high quality manufactory who can supply all types of flanges.

A182 F304 forged flanges are stainless steeel flanges,ASME B16.5 SW flanges are socket weld flanges following American Standard specifications.

What is a blind flang,what about its specification and advantage.

A flange can be defined as a method that helps in connecting pipes, valves, etc., to form a full piping system. There are seven flange classes ranging: #150, #300,#400, #600, #900, #1500 #2500.

Class 300 LAPJ flanges are used with lap joint stub end.The pressures for ASME B16.5 forged flanges including 150LB,300LB,600LB,900LB,1500LB12500LB.

Socket weld flange can socket with the end of pipe,and welding on the pipe.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Reducing pipe (reducing nipple) is a pipe fitting used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joints and eccentric reducing joints

ASME B16. 5 pipe flanges: Weld Neck Flange ( WN),Slip-on Flange (SO), Threaded Flange (THD),Socket Weld Flange (SW),Blind Flange (BL),Lap Joint Flange (LAPJ),Plate flange (PL)

High pressure flange carbon steel material: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH

What is a Spectacle Flange and what about its specification and advantages.

ASTM A105 threaded fittings is commonly used carbon steel grade which is used to manufacture forge piping components such as forged fittings and flange of small diameter piping, generally for piping whose nominal diameter is NPS 2 or smaller.

What is a Weld Neck(WN) Flange and what about its specification and advantages.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

A flange can be defined as a method that helps in connecting pipes, valves, etc., to form a full piping system. There are six flange classes ranging from #150 to #2500. Governed by B 16.5 standards, the ASME B16. 5 Class 300 Flange provides a pressure capacity of 300Lb.