Stainless Steel Flange High Quality Flange

300LB SO flanges is a commonly used pressure of flanges,all flanges could be 150LB,300LB,600LB,900LB,1500LB,2500LB.Stainless steel forged flanges are always used in chemical environment because of the great anti-corrosive function.The most popular stainless steel grades are A182 F304/304L and A182 F316/316L.

ASTM A350 LF2 is a low temperature carbon steel material, mainly used to manufacture flanges and other connectors. This material has good low temperature performance and corrosion resistance, and is suitable for use in low or ultra-low temperature environments.

High pressure flange carbon steel material: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH

Large diameter flat welding flange has less high-pressure suitability compared to its weld neck counterpart. The basic ring style is suitable for the occasion of low pressure. The butt weld category of the flange is known as a weld neck flange. It suits the occasion of high temperature and pressure as defined in the ASME B16.47 code.

Blind flanges are used to seal the end of piping systems or pressure vessel openings.

Flange connection is an important connection method in pipeline construction. A flange is a category of gasket made to fix two sections of pipe together, or act as a removable plug at the end of a single pipe.

Stainless steel flange, also called SS flange, it means the material of flange is stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500.

Weld Neck Flanges are a very common type of pipe flanges used in various industrial applications. They have a long tapered hub and are often used for high pressure applications.

Usage of a weld neck flange

900LB slip on flange can slip on the pipes and welded with the pipes.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flange can used over 50 years.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

A182 F304 forged flanges are stainless steeel flanges,ASME B16.5 SW flanges are socket weld flanges following American Standard specifications.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

A182 F304 slip on flange include flanges, bolt holes and sealing surfaces. The flange is a flat ring structure with an outer diameter larger than the outer diameter of the pipe connected to it. The bolt holes are evenly distributed on the flange and are used to install bolts to connect two flanges.

ASTM A350 LF2 Blind Flange is a common low-temperature carbon steel material, mainly used in the manufacture of low-temperature and high-pressure forged pipe fittings and flanges.

Carbon Steel: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.
Duplex Stainless Steel: ASTM A182 F51, F53, F44

Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317,347,904L, 1.4404, 1.4437.

Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe.

Stainless steel weld neck flange is a part widely used in pipeline engineering. The diameter and wall thickness of the pipe at the interface end are the same as the pipe to be welded, and the connection of the pipe is realized by welding.

Reducing pipe (reducing nipple) is a pipe fitting used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joints and eccentric reducing joints

Slip-On flanges are commonly lower in price than weld-neck flange.However, customers should bear in mind that this initial cost saving may be diminished by the additional cost of the two fillet welds required for proper installation.

These Stainless Steel A182 Threaded Union are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

The descipton ,specification ,and advantages of a weld neck flange.

WN flanges is the most popular type of flanges.ASTM A182 F304 is a American standard grade of stainless steel.The other popular grade is A182 F316.ASME B16.5 forged flanges inculding WN flange,SO flange,SW flange,THD flange,LAPJ flange,BL flange.All types of flanges have pressures:150#,300#,600#,900#,1500#,2500#.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

An assembly with limited space may be an instance in which a socket weld is selected, provided the pressure class is comparatively low and the fluid is not corrosive or for extremely high temperature service.

This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

600LB SW flanges can socket with the flanges and then welded with the pipes.Large diameter flanges can be series A and series B.ASME B 16.47 A & B are standard for large diameter flanges.