Stainless Steel ASTM A403 WP304L Butt Weld Cross Fittings

ASME B16.9 elbow means BW elbow.ASME B16.9 is an American Standard for Butt welded fittings,A234 WP22 is represnets BW Alloy pipe fittings. Elbows can be 90 deg and 45 deg to change the pipes in 90 degree or 45 degree.Sometimes the elbows can be 180 deg to satisfy the clinet’s demands.

BW 90 degree elbow is formed by hot forming and connects steel pipes or other pipe fittings through butt welding process. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

usage,specification of a equal tee and ite difference between a reducing tee.

The function of an end cap is to block off the end of a line a piping system, This is achieved by placing the end cap over the open line and welding around the point.

A pipe reducer is the type of pipe fitting which helps to join two pipes with different diameters. There are various material for The pipe reducers as per the demands of industries and also available in many dimensions.

Steel pipe tee has three branches that can change fluid direction. It has T-shaped or Y-shaped, and include Equal Tee and Reducing Tee (Reducer Tee). Steel tee is widely used in pipe networks for convey liquids and gases.

Elbows and seamless elbows are often used in the bending parts of pipes to change the direction of pipes Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

Butt weld fittings are manufacture by seamless or welded pipe. For pipe fittings manufacturers, the forming process of welded pipe and seamless pipe is basically same. Butt welded fittings can be divided into carbon steel butt welded fittings and stainless-steel butt-welded fittings

45 ° elbow is also called “45 elbow or 45 ell”, and its bending mode can change the flow direction of fluid / gas in the pipeline by 45 °. The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

Carbon BW tee is wide used in many applications because welded connection can provide permanent connection.Schedule XS is wall thickness of this tee in the picture.In addition,the commonly used wall thicknesses:SCH40, SCH80.

45 deg elbow is a type of elbows,the other most used type is 90 degree elbow.These elbows have same functions,the only difference is the 45 degree elbow can changes the direction of pipes in 45 deg while 90 degree elbow can changes in 90 deg.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

12in concentric reducer is a normal size pipe fitting that can used for many applications.SCH 80 is a commonly used wall thickness for BW fittings.There are two types of reducer:concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

24in equal tee is belong to large dimension fittings.SCH 40 is a commonly used wall thickness for butt welded fittings.Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

ASME B 16.9 lateral tee is one special type of BW tees.It has similar functions to the normal tee,the only difference is the lareral tee can change the direction in 45 degree while the normal one changes in 90 degree.

How to use a BW tee in a pipesystem,what about its specification and advantages.

BW elbow can welded with pipes to achieve strong and permanent connection.ASTM A234 WPB pipe fittings are the most popular carbon steel fittings.There is also has A234 WPC for carbon steel fittings.

DN1200 BW elbow is belong to large dimension fittings,these fittings always be butt welded fittings because of the large size.Butt welded fittings used welded type to connect with the pipes to achieve strong and permanent connection.

What is a 90 DEGREE LR ELBOW and what about its specification and advantages.

Steel pipe bend is a butt welded fitting to transport fluids or gas.The degree of steel bend will be customize according to the client’s demend.Pipe bend and elbow have some similarity,you could find the summary “pipe bend VS elbow” below.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

Classify,specification of a BW 90 degree elbow

45° Pipe Elbow is also known as “45 bends or 45 ells”. The 45° pipe elbow is used to connect tubes at a 45° pipe angle. As the name suggests, this is a pipe fitting device which is bent in such a way to produce 45° change in the direction of flow of the fluid/gas in the pipe.