Stainless Steel A182 Threaded Tee Dimensions
High pressure Stainless Steel A182 Threaded Tee is used for providing branch, it can be divided into equal tee and reducing tee. The common used dimension is DN15, DN20,DN25 and DN40 for socket weld tee and threaded tee.
We are the manufacturer of Stainless Steel A182 Threaded Tee, SS304, SS316 is the common grade for that. We would provide complete documents to support your job, including Catalog, Datasheet, MTC and so on.
These Stainless Steel A182 Threaded Tee are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.
High pressure Stainless Steel A182 Threaded Tee is used for providing branch, it can be divided into equal tee and reducing tee. The common used dimension is DN15, DN20,DN25 and DN40 for socket weld tee and threaded tee.
Threaded fittings are mainly used for small pipe diameters, generally for piping whose nominal diameter is NPS 2 or smaller. Threaded joints probably represent the oldest method of joining piping systems.
High pressure Stainless Steel A182 Threaded Tee is used for adding pipe branchs. An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe Stainless Steel A182 Threaded Tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.
Equal tees are available in sizes from half an inch to 48 inches (or larger) and in seamless and welded execution (seamless up to 24 inches, welded for tee sizes above 24 inches).
| Threaded Pipe Fittings Specification | |
| Shape | Elbow,Tee, Cross, Coupling, Cap, Swage Nipple, Bushing, Plug, Nipple, Union, Hex Nipple,Threadolet. |
| Size Range | 1/8″ – 4″ / DN6 – DN100 |
| Pressure Rating | Class 2000lbs, 3000lbs, 6000lbs |
| Thread Type | NPT, PT, BSPP, BSPT, PF |
| Standard | ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97 |
| Carbon Steel | ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH |
| Alloy Steel | ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22 |
| Stainless Steel | ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437. |
| Duplex Stainless Steel | ASTM A182 F51, F53, F44 |
Stainless Steel A182 Threaded Tee Drawing and Dimension
Material
These Stainless Steel A182 Threaded Tee are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.
The specification of ASTM A182 Stainless Steel Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.
Stainless Steel A182 Threaded Tee Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 11 | – |
Stainless Steel A182 Threaded Tee Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000, MPa – 515 | Psi – 30000, MPa – 205 | 35 % |
Stainless Steel A182 Threaded Tee Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18-09 | X5CrNi18-10 |
