Stainless Steel A182 Threaded Hex Nipple Dimentions

Threaded elbow can reduce pipeline stress and pressure drop reduce pipeline stress, reduce pipeline pressure drop, and reduce pulsating power of fluid to pipeline.

Threadolet considered to a threaded fitting, and it is manufactured in 3000 and 6000 classes. t typically is in the size range of 1/2″ to 2” and is welded over a hole either drilled or burned in the pipe.

F316 threaded  caps are components used to close the ends of stainless steel pipes or pipe fittings, and achieve the functions of sealing and fixing through threaded connection.

Concentric BW reducer is a tpye of reducers,there is also eccentric reducer to choose.BW reducers used to reduce the flow of the fluids in the piping system.Stainless steel pipe fittings are popular because the superior functions.SCH 40 and SCH 80 are the commonly used wall thicknesses in butt welded fittings.

Threaded pipe fittings provide permanent welded connections for pipes. Threaded joints probably represent the oldest method of joining piping systems. Same as Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.
They are available in three pressure ratings: 2000lbs, 3000lbs and 6000lbs.

CL3000 threaded coupling is the most used pressure of couplings.ASTM A105 forged fittings are pipe fittings in material of carbon steel.ASTM A105 specification is also including forged flanges.

Threaded elbow material and size
type: 90 degree and 45 degree elbow
Shape: straight and reducing elbow
Thread Type: NPT, PT, BSPP, BSPT, PF
Size Range: 1/8”-4”/DN6-DN100
Pressure Rating: Class 2000LBS, 3000LBS, 6000LBS
Standard: ASME B16.11, BS3799
Carbon Steel: ASTM A105/A105N
Low Temp Carbon Steel: ASTM A350 LF2/LF3
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 310S, 317, 347, 904L, 321

Pipe Swage Nipple (also known as reducing nipple) is divided into tubing sub and casing sub. Flanging nipple in pipe connection is commonly used with flange.

hat is a threaded tee,what about its specification and its difference between a elbow.

Swage Nipple and short joint reducing joint are pipe fittings used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joint and eccentric reducing joint

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.
The Alloy Steel A182 Threaded Elbow material grade contains ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22.

Reducing pipe (reducing nipple) is a pipe fitting used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joints and eccentric reducing joints

Concentric swage nipple is mainly used for vertical pipeline. t is used to change the diameter of the pipe and connect two pipes of different sizes.

The overall shape of the A105N hex head plug is a combination of a hexagonal head and a plug body. The hexagonal head design is convenient for operation with tools such as wrenches, and can provide better torque transmission, so that the tube plug can be tightened or loosened.

What is a treaded nipple,what about its specification and its difference between coupling.

Threaded elbow and coupling are used thread type to connect the pipes to trsnsport flow in piping system.THD fittings are belong to forged fittings,ASME B16.11 fittings are American Standard for forged fittings.

Threaded tee used thread connection to combine with pipes.ASME B16.11 fittings are forged fittings belong to American Standard.Tees can divided as equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

Forged threaded pipe fittings are named by its manufacturing forging process and produced according to ASME B16.11, MSS-SP-79\83\95\97 and BS3799 standards. It is a connector in between nominal bore pipes. Their material can be made of carbon steel A105 and stainless steel SS316 & 304.

Threaded nipple is a short piece length of pipe or tube. Its size is specified according to the length of this section of pipe and the diameter. It can be with threaded or flat ends. And both ends can be the same or different.
There are two shape : threaded one end (TOE) and threaded both end ( TBE).

These Stainless Steel Pipe Fittings are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

What is a plug,what about its specification and its difference between a caps.

Threaded couplings used thread connection to connect two pipes.Threaded coupling is belong to forged steel fittings.The other type of forged fitting is socket weld fittings.All the forged fittings are high pressure pipe fittings.

We are manufacturer of High Pressure Pipe Fittings from China. Threaded fittings are available in pressure ratings 2000LB, 3000LB, and 6000LB; Threaded Coupling Dimension is 1/8″ –  4″ / DN6 – DN100.

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.

BS3799 F304 Threaded Pipe Fittings are named by its manufacturing forging process and produced according to ASME B16.11, MSS-SP-79\83\95\97 and BS3799 standards.

According to its radius of curvature, there are long radius elbow and short radius elbow. Long radius elbow refers to its radius of curvature is equal to 1.5 times the outside diameter of the pipe, that is, R=1.5D; A short radius elbow means that its radius of curvature is equal to the outer diameter of the pipe, that is, R= 1.0d.(D is the diameter of the elbow, and R is the radius of curvature).

B16.11 threaded fittings can be furnished in product forms of Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, plug and bushing.Threaded fittings are available in pressure ratings Class 2000, 3000, and 6000;

What is a Threaded Coupling,what about its specification and its advantages.