SS316L Stainless Steel threaded tee ASME B16.11

Hex Head Bushing: A hex bushing is a threaded fitting with a hex head used to tighten the fitting into a threaded opening. Flush Bushing: Flush bushing are used in piping systems. They are installed in the pipe to reduce the size of the pipe. Forged bushing is ideal for use with water and oil in chemical, petrochemical, pulp, paper, shipbuilding, waste incineration, and semiconductor industry applications.

The basic difference between couplings and unions in use is that couplings connect pipes to pipes or pipes to bends.Unions are used to connect and disassemble part of the piping system for maintenance or replacement.

CL3000 threaded coupling is the most used pressure of couplings.ASTM A105 forged fittings are pipe fittings in material of carbon steel.ASTM A105 specification is also including forged flanges.

90° Steel Pipe Elbow is the most commonly used elbow type in pipe system with the function to change the direction of fluid in 90 degree. It connects pipes with same or different diameter.

What is a plug,what about its specification and its difference between a caps.

The base of the threaded branch pipe stand is the same as that of the butt welded branch pipe stand, but its branch connection is screw connection, which does not require welding. The threaded branch pipe has two pressure classes, 3000 # and 6000 #.

Carbon Steel ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.
Duplex Stainless Steel: ASTM A182 F51, F53, F44

Weldolet, an economical butt-weld branch connection, is designed to minimize stress concentrations and provide integral reinforcement. manufactured to meet your specific reinforcement requirements.

There are different types such as the threaded reducing hex nipple or the Stainless Steel Threaded Hex Nipple. However, it is different from ordinary threaded nipple.

A threaded bushing, also known as a threaded insert, is a fastener element that is inserted into an object to add a threaded hole. Bushing Threaded Types: NPT  PT  BSPP  BSPT  PF.

Threaded pipe fittings provide permanent welded connections for pipes. Threaded joints probably represent the oldest method of joining piping systems. Same as Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.
They are available in three pressure ratings: 2000lbs, 3000lbs and 6000lbs.

Threaded elbow material and size
type: 90 degree and 45 degree elbow
Shape: straight and reducing elbow
Thread Type: NPT, PT, BSPP, BSPT, PF
Size Range: 1/8”-4”/DN6-DN100
Pressure Rating: Class 2000LBS, 3000LBS, 6000LBS
Standard: ASME B16.11, BS3799
Carbon Steel: ASTM A105/A105N
Low Temp Carbon Steel: ASTM A350 LF2/LF3
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 310S, 317, 347, 904L, 321

ASTM A182 F316 threaded full couplings are pipe fittings with two threaded ends.ASME B16.11 forged fittings have THD fittings and SW fittings,THD fittings have CL2000,CL3000,CL6000 to choose;SW fittings have CL3000,CL6000,CL9000 to choose.

Half Coupling: One end of a half thread coupling is threaded and the other end is welded. Straight: It is a kind of pipe coupling with the same diameter at both ends. Reducing: The two ends of the coupling have different sizes

What is a threaded elbow,what about its specification and its advantages.

Threaded couplings could be divide into full coupling (both ends threaded) and half coupling(one end threaded,the other end welded).Forged pipe fittings dimensions are all in small size,1/8″-4″.

hat is a threaded tee,what about its specification and its difference between a elbow.

SS304 90 deg elbow is a stainless steel pipe fitting used to changes the direction of the flow in 90 degree.Threaded steel pipe fittings are a type of forged steel pipe fittings.The other forged fitting is SW pipe fitting.

Threaded elbow and coupling are used thread type to connect the pipes to trsnsport flow in piping system.THD fittings are belong to forged fittings,ASME B16.11 fittings are American Standard for forged fittings.

Threaded nipple is a short piece length of pipe or tube. Its size is specified according to the length of this section of pipe and the diameter. It can be with threaded or flat ends. And both ends can be the same or different.
There are two shape : threaded one end (TOE) and threaded both end ( TBE).

ASME B16.11 forged fittings are popular because of the famous American Standard and the variety products.Socket weld (SW) fittings and threaded (THD) fittings are both forged fittings.Stainless steel pipe fittings are always chosen in corrosive and chemical environments.

Threaded Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. 90° Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Flush Bushing: Flush bushing are used in piping systems. They are installed in the pipe to reduce the size of the pipe. Forged bushing is ideal for use with water and oil in chemical, petrochemical, pulp, paper, shipbuilding, waste incineration, and semiconductor industry applications.

Stainless steel 90 deg threaded elbow is popular because it is easy to install or replace.ASME B16.11 forged fittings are pipe fittings according to American Standard.There are many types fot customers to choose:NPT PT BSPP BSPT PF.

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

Swage Nipple and short joint reducing joint are pipe fittings used for straight-line connection of two pipes with different sizes to realize pipe diameter reduction. There are concentric reducing joint and eccentric reducing joint

There are various types of ASME B16.11 socket-welding fittings, such as Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, Union and Sockolet; while ASME B16.11 threaded fittings can be furnished in product forms of Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, plug and bushing.