SS316L Stainless Steel CL1500 WN Flange

orged steel flange is a disc-shaped piece of equipment used to connect a pipe to fittings or valve or other component to form a pipework system. Usually flange has been attached to pipe or tube end to, and then a gasket is inserted in the middle to form a seal. Finally they are joined together with bolts and nuts.

Blind flanges are used to seal the end of piping systems or pressure vessel openings.

Stainless steel socket flanges are installed during pipeline construction and connected to another pipeline through bolts to achieve a tight connection of the pipeline.

The connection method of A182 F11 socket flange is to insert the pipe into the socket of the flange, and then seal it with welding or use a sealing gasket. This connection method is relatively strong and can adapt to the thermal expansion and contraction of the pipe to a certain extent.

Class 600 WN flange is a high pressure flange used in piping system.ASTM A350 LF2 is represents to low temperature carbon steel in American Metal Standard.Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.

What is a Weld Neck(WN) Flange and what about its specification and advantages.

600LB Silp On (SO) Flange can slip on the pipes and welding with the pipes.Stainless steel flange are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

There are various material grade for ASTM A182 stainless steel flange: F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

What is a Weld Neck Flange and its 2 different shapes

CL 600 slip on flanges are commonly used type of flanges.ASTM A182 F316L is a popular grade for stainless steel.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flanges can used over 50 years.

Flange connection is to fix two pipes, pipe fittings or equipment on a flange first, and then Flange pads are added between the flange plates and fastened together with bolts to complete the connection

Description of THD flange,what about its specification and advantages.

Usage of a weld neck flange

Stainless steel weld neck flange is a part widely used in pipeline engineering. The diameter and wall thickness of the pipe at the interface end are the same as the pipe to be welded, and the connection of the pipe is realized by welding.

ASME B16.5 flange is a flange made accoding to American matal standaed.Class 150 WN flange is the lowest pressure of flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

DN150 SW flange is a 6in flange used to socketed with the pipes and then welding on pipes.CL150 forged flange is the lowest pressure flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

SW flange can be used in many applications in piping systems.SW Flanges are forged flanges.Socket weld flange has many classes:150LB, 300LB, 600LB, 900LB, 1500LB, 2500LB.Stainless steel flanges have better functions than other flanges which made from carbon steel or alloy steel.

The equal cross is one kind of the pipe cross,  the equal cross means all the 4 ends of the cross are in same diameter.
The reducing cross also is called unequal pipe cross , it is the pipe cross which the four branch ends are not in the same diameters.

Socket weld (SW) flange is a type of forged flanges,these flanges can socket and wedled with pipes,you could find the flanges specifications in the content below.Stainless steel flanges are popular because the stainless steel has great corrosion resistance so that these flanges can used in some corrosive environments.

What is a SW flange and what about its specification.

A weld neck flange consists of a circular fitting with a protruding rim around the circumference. Generally machined from a forging, these flanges are typically butt welded to a pipe. The rim has numerous holes drilled into it that enables the flanged to be attached to a bolted flange.

Flange connection is an important connection method in pipeline construction. A flange is a category of gasket made to fix two sections of pipe together, or act as a removable plug at the end of a single pipe.

Flanges are usually welded or screwed. Flanged joints are made by bolting together two flanges with a gasket between them to provide a seal. Large diameter flat welding flange has less high-pressure suitability compared to its weld neck counterpart. The basic ring style is suitable for the occasion of low pressure.

ASTM A182 F304 spectacle blind is more often used than carbon steel spectacle blind as its great anti-corrosive function.ASME B16.48 is the standard of spectacle blinds.The two components have different functions in the piping system.

It is used to insert the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s outer diameter, pipe and flange could be connected by lap welding at the top and bottom of the flange. The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange.