SS 316L Elbow Butt Welded Fittings

SS400 90 DEG elbow is used to transport flow in piping system.Butt welded fittings used welded connection to connect with the pipes to achieve the strong and premanent connection.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

Buttwelding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS

Concentric reducers will change kindly between the pump and piping， A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.

90 degree elbow, also called “90 bends or 90 elbows”, are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows.

Clean the steel pipe elbow body and wrap the polyethylene tape on it with adhesive. Usually the thickness of coating is 2mm. They are used in the underground pipeline system. Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D.

A420 WPL6 tee is a pipe fitting with three ports, mainly used to divide a pipe into two branches or merge two branches into one pipe. Common ones are equal diameter tees and reducing tees. In the layout of the pipeline system, the structure of the tee can flexibly change the flow direction of the fluid to achieve the function of branching or merging.

Connect two pipes with the same or different nominal diameters to make the pipeline turn at 90 degrees, 45 degrees, 180 degrees and other angles

Butt weld fittings would also be referred to as welded pipe fittings. When these would be used in stainless steel and carbon steel, they would be able to offer certain advantages as compared to socket weld and threaded fittings. Whereas socket weld would only be available up to a specific size, you would find butt weld fittings to be available in sizes starting 1/2 inch to 72 inch.

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing. It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.

What is a STEEL PIPE TE and what about its specification and advantages.

The Butt Weld 45 Degree Elbow is a pipe connector in the shape of a curved pipe section with a bending angle of 45°. It consists of a curved part and straight edge parts at both ends. The radius of curvature of the curved part is an important parameter, which is usually determined according to the nominal diameter of the pipe and the use requirements.

Pipe tees can be two types:Reducing Tee and Equal Tee.Both types of tees can branch the pipes in the piping systems.Schedule 40 is a wall thickness of the butt welded fittings,the commonly used schedules are SCH 40,SCH 80.

A234 WP11 elbow is a pipe fitting used to change the direction of the pipeline. It is made of alloy steel. Its basic structure is a curved tubular part, usually with connection interfaces at both ends to connect with other pipeline components.

90 deg long radius elbow is a commonly used type in elbows.There are aslo 90 degree short radius elbow and 45 degree elbow.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Concentric (COC) reducer is one type of BW reducer.The other type of reducer is Eccentric (ECC) Reducer.The different of COC Reducer and ECC Reducer is the internal structure.BW pipe fittings are popular because of the strong and permanent connection.

Butt Weld Fittings include elbows, tees, cross, caps and reduces. These fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule. Buttweld fittings are manufacture by seamless or welded pipe and are formed to get the shape of elbows, tees and cross etc.

Stainless elbow is a popular used type of elbow becase the stainless steel has excellent an-ti corrosive function.Shanghai Zhucheng is an excellent butt welded fittings factory who supplys high quality pipe fittings and flanges for years.

24in equal tee is belong to large dimension fittings.SCH 40 is a commonly used wall thickness for butt welded fittings.Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

Equal BW tee is a commonly used fittings in butt welded fittings.ASTM A234 WPB WPC are both grades for carbon steel fittings.Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

In the layout of the pipeline system, long radius elbows should generally be used for connection, and short radius elbows are usually used in places where the installation position of the pipeline system is compact or to reduce costs

Concentric reducer consists of the symmetrical and conical shaped fittings that enlarge or reduce the diameter equally about the center line.

Elows’ standard and its wall thickness

316L 90 deg elbow is a stainless steel pipe fitting which can used in chemical environment because of its an-ti corrosive function.SCH 10S is repersents to the wall thickness in butt welded fittings. Commonly used wall thickness is SCH 40 and SCH 80.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

According to its radius of curvature, there are long radius elbow and short radius elbow. Long radius elbow refers to its radius of curvature is equal to 1.5 times the outside diameter of the pipe, that is, R=1.5D; A short radius elbow means that its radius of curvature is equal to the outer diameter of the pipe, that is, R= 1.0d.(D is the diameter of the elbow, and R is the radius of curvature).