SS 304/316 Pipe Tees ASME B 16.9

Carbon steel elbow is a weldable & threaded pipe fitting that allows for change of flow direction, we manufactured them as standard of ASME B16.9 and B16.11. ASTM A234 WPB Elbow is the common used in the oil and gas industires.

usage,specification of a equal tee and ite difference between a reducing tee.

BW tees and elbows are both commonly used pipe fittings used to transport flow in piping system.Stainless steel pipe fittings re popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

According to the production process, it can be divided into: welding elbow, stamping elbow, pushing elbow, casting elbow, butt welding elbow, etc. Other names: 90 degree elbow, right angle bend, etc.

What is Galvanizing?

Galvanizing, or galvanization, is a manufacturing process where a coating of zinc is applied to steel or iron to offer protection and prevent rusting. There are several galvanizing processes available, but the most commonly offered and used method is called hot-dip galvanizing.

Butt weld elbow is the most used type of elbows.It can welded with the pipes to achieve strong and permanent connection.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel fittings can used over 50 years.

Elbow is a fitting device which is bent in such a way to produce 90 degree change in the direction of flow of the content in the pipe.

Specificationo and usage of a 90degree BW elbow.

When short radius elbows are used, the maximum working pressure should not exceed 0.8 times of long radius elbows of the same specification Miter elbows are usually used for large-size pipes with moderate conditions in low pressure (design pressure s2.0mpa), water and similar fluid media

Butt welded lateral tee is a special type of BW tees.It is different from the normal tees as the lateral tee can change the direction of the pipe system in 45 degree.Carbon steel fittings are the most used fittings as carbon steel material has great functions and affordable price.

Butt welded fittings,can be abridged as BW fittings.Butt welded means the pipe fittings used welded connection to connect with pipes.BW fittings including Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End.Carbon steel always be the material of these fittings as carbon steel has great functions and affordable price.

ASME B16.9 Stainless Steel Butt Weld Cross Fittings The function of a cross is similar to that of a tee by means of the exception of providing two 90 Deg outlets opposite each other.

BW equal tees are the most used tees in the all types of tees.There are equal tee and reducing tee.Galvanized carbon steel pipe fittings have better corrosion resistance than carbon steel fittings.

ASTM A234 WPB is a common grade for 90 degree long radius elbow, which is one of the highly demanded. They available in a large size and thickness range. They have a good performance and suffices most industrial pipeline needs.

Butt welded elbow,also called BW elbow,there are two types elbows:Reducing Elbow and Equal Elbow.both types elbows can change the fluids or gas in 45 deg or 90 deg,while reducing elbows also can reduce the flow in the piping system.Shanghai Zhucheng has experienced steel pipe fittings factory to supply high quality fittings.

S31803 90 degree elbow is a kind of stainless steel with two-phase structure of ferrite and austenite. It combines the high strength of ferritic stainless steel with the good toughness and corrosion resistance of austenitic stainless steel.

45 deg elbow has three types:BW (butt welded) elbow,SW (socket welded) elbow and THD (threaded) elbow.Elbows can also be 90 degree and 180 degree to meet different demands.Shanghai Zhucheng is an experienced pipe fittings manufacturer who supplys high quality pipe fittings and flanges for many years.

Concentric reducer is used to join pipe sections or tube sections on the same axis. It is cone-shaped, and is used when there is a shift in diameter between pipes. A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.

There are 45 ° elbows and 90 ° elbows in common use. Those with a bending radius of about 1.0 times the outer diameter of the pipe are called short radius elbows; The long radius elbow is about 1.5 times the outer diameter of the pipe

90 degree elbow’s usage and its specification

Bending radius less than or equal to 1.5 times of pipe diameter belongs to elbow, and bending radius greater than 1.5 times of pipe diameter belongs to elbow

Elbow is divided into carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon, PPC, etc. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

12 IN Carbon Steel Elbow is an important pipe fitting in piping system as it can change the direction of the pipes in 90 degree.ASTM A234 WPB is a commonly used grade for carbon steel in American Standard.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Carbon steel elbows are the most commonly used elbows in all the types and material elbows.Large dimensions elbow is butt welded fitting,you can find the butt welded fittings specification below.