SS 304/304L Elbow Short Radius

Concentric reducers are tapered and are used when the diameter between pipes changes. It can be axially shifted and externally reconfigured to offer more efficient reducer connection.

45 deg elbow has three types:BW (butt welded) elbow,SW (socket welded) elbow and THD (threaded) elbow.Elbows can also be 90 degree and 180 degree to meet different demands.Shanghai Zhucheng is an experienced pipe fittings manufacturer who supplys high quality pipe fittings and flanges for many years.

Concentric reducer consists of the symmetrical and conical shaped fittings that enlarge or reduce the diameter equally about the center line.

90 degree elbow’s usage and its specification

Concentric reducer’s dimnesions and its usage and advantage

Concentric reducers are beneficial to use where different ratings and to wear protection is required in conveying between flanges or pipes. nd the pipe is connected through conical transition section on the same axis.

Steel pipe tee is a pipe fitting used to tansport the flow in the piping system.Carbon steel fittings are used in many applications becasue of its great excellent functions.

Radius of Long Radius (LR) Elbows is 1.5 times the pipe diameter. Radius of Carbon Steel Short Radius Elbow is 1.0 times the pipe diameter. Carbon Steel Seamless Elbow are in demand for use between two lengths of pipe or tube allowing a change of direction, usually these elbows distinguished by connection ends.

Steel Reducing Tee: The branch diameter is smaller than the main line diameter. Tee reducer is usually described as NPS diameters in 4”x 4”x 3”, 4”is the main line pipe diameter, and 3”is the reducing branch

Spiral wound gasket (SWG) is a fitting used with flanges.ASME B16.20 is the American Standard for gasket.

The elbow radius mean curvature radius. If the radius is the same as pipe diameter, it called short radius elbow, also called SR elbow, normally for low pressure and low speed pipelines. If the radius is larger than pipe diameter, R ≥ 1.5 Diameter, then we call it a long radius elbow (LR Elbow), applied for high pressure and high flow rate pipelines.

45 deg elbow can change the direction of fluids or gas in 45 degree.There is also has 90 deg elbow to be chosen.45 degree elbow has many diffences with 90 degree elbow.All types of elbows can be Equal Tee and Reducing Tee to satisfy different demands.

ASTM A182 F304 pipe fittings are inculding many fittings,among these,stainless butt welded elbows are the most common used fittings.For 90 deg elbows,there are two types :LR (Long Radius) and SR (Short Radius).Stainless steel pipe fittings are popular because of the superior functions.

SS 316L elbow has better corrosion resistance than other material elbows.Butt welded fittings will use welded connection to connect with pipes,so these fittings have great anti leakage function.SS316L elbows always be chosen because of its excellent functions so that it can be used in many years.

Elbow could be ranged from direction angle, connection types, length and radius, material types. As we know, according to fluid direction of the pipelines, elbow can be divided into different degrees, such as 45 degree, 90 degree,180 degree, which are most common degrees. Also there has 60 degree and 120 degree, for some special pipelines.

ASTM A234WP5 6IN SCH40 90DEGREE ELBOW Fittings attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc,

The function of a 45 degree elbow is the same as a 90 degree elbow, but the measurement of dimensions is different to that of the 90 degree elbow.Compared to 90 degree elbow, 45 degree elbow produces less friction, and with the lower pressure.

24in equal tee is belong to large dimension fittings.SCH 40 is a commonly used wall thickness for butt welded fittings.Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

45 deg elbow has three types:BW,SW,THD.Among these,The commonly used elbows can be 45 deg and 90 deg.BW (butt welded) 90 degree elbows have LR (long radius) and SR (short radius) while 45 degree elbows only have LR type.

Pipe elbows have three types:THD (threaded),SW (socket weld),BW (butt welded).These elbows used different connections to connect with the pipes in piping system.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel fittings can used over 50 years.

Buttwelding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS

90 deg elbow is always used in piping systems.The other degree of elbows is 45 deg elbow.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.A403 WP316L is a grade for stainless steel in American Standard.

A234 WPB BW reducer has the most wide ragnge of applications in all types of butt welded reducer, because A234 WPB is the most used grade in carbon steel.Carbon steel pipe fittings are accepted in many projects because these fittings have great functions and reasonable price.

The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

BW 90 deg elbow is the most used type of elbows in many industries.Schedule 80 is represents the wall thickness of the butt welded fittings.It is a commonly used wall thickness.another wall thickness is SCH 40.