SR Elbow Wall Thickness SCH XXS

What is a steel pipe tee and what about its standard

Concentric reducer’s dimnesions and its usage and advantage

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing, It helps to change direction at 90 degree.

Take carbon steel buttweld fittings into a bath of molten zinc. That would get more zinc and make the price is high. We surfaced carbon steel forged fittings with electrogalvanizing because it is pretty and low cost.

Reducing tee a one of the type of tees,the other type is equal tee.these two types tees have similar functions,but the reducing tees can reduce the flow.Shanghai Zhucheng is an excellent Pipe fittings manufacturer who supplys high quality fittings for many years.

ASTM A403 Stainless Steel Butt Weld 45 Degree Elbow refers to the material of forged and rolled austenitic stainless fittings for pressure pipes. Common grades are WP304/L, WP316/L. They can be used into many fields as engineering industry, energy conversion plants etc. ASTM A403 WP304, WP316 Elbow are buttweld fittings made for austenitic stainless steel applications with forged material.

ASME B16.9 Stainless Steel Butt Weld Cross Fittings The function of a cross is similar to that of a tee by means of the exception of providing two 90 Deg outlets opposite each other.

Lateral tee is a special type of BW tees,it can branch the fluids or gas in 45 deg.Galvanized steel pipe fittings has better anti-corrosive function than normal carbon steel fittings.Galvanized Steel Pipe Fittings have similar corrosion resistance as stainless steel fittings,but more cheaper than stainless steel pipe fittings.

Carbon Steel Pipe Fittings Elbow is a most common type of CS fitting used to join pipe or tubing to allow a change of direction, usually a 90° or 45° angle, Elbows ends may be machined for butt welding , threaded , or socketed

Butt Weld Concertric Reducer is the type of pipe fitting which helps to join two pipes with different diameters. There are various material for The pipe reducers as per the demands of industries and also available in many dimensions.

Pipe Elbow is installed between two long pipes for changing the direction of the flow of liquid or fluid. These are commonly available in two types; 90 degrees and 45 degrees. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

What is a straight and reducing tee and Dimensions and Standards

316L 90 deg elbow is a stainless steel pipe fitting which can used in chemical environment because of its an-ti corrosive function.SCH 10S is repersents to the wall thickness in butt welded fittings. Commonly used wall thickness is SCH 40 and SCH 80.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

SS 304/304L elbow is stainless steel pipe fitting.304/604L is the most commonly used grade of stainless steel in American Standard.Elbows can made as 90 deg and 45 deg.Among these,90 degree elbows can be LR and SR while 45 degree elbows only have LR type.

When short radius elbows are used, the maximum working pressure should not exceed 0.8 times of long radius elbows of the same specification Miter elbows are usually used for large-size pipes with moderate conditions in low pressure (design pressure s2.0mpa), water and similar fluid media

A234 WPB/WPC BW concentric reducers are carbon steel butt welded fittings,among these,A234 WPB is more chosen in many industries.BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Elbow is a commonly used connecting pipe fitting in plumbing installation, which is used for connecting pipe bends

Concentric reducer is used to join pipe sections or tube sections on the same axis. It is cone-shaped, and is used when there is a shift in diameter between pipes. A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.

Elows’ standard and its wall thickness

Reducer can divided as concentric reducer and eccentric reducer.These reducer have same functions in pipe system,the only diffierence is the internal structure. Carbon steel fittings are used in many applications because of its great excellent functions.

ASTM A234 WPB Butt Welded Fittings are the best selling products in Shanghai Zhucheng Pipe Fittings Manufacturing Co Ltd from China.We can also supply customers forged pipe fittings,pipes and some related products.

Alloy steel butt-weld pipe caps are mainly used to close pipeline systems to ensure that the fluid in the pipeline will not leak.It is usually welded at the end of the pipeline to provide a reliable sealing effect.

Elbow is a fitting device which is bent in such a way to produce 90 degree change in the direction of flow of the content in the pipe.

BW 90 deg elbow is the most used type of elbows in many industries.Schedule 80 is represents the wall thickness of the butt welded fittings.It is a commonly used wall thickness.another wall thickness is SCH 40.

90 deg elbow is always used in piping systems.The other degree of elbows is 45 deg elbow.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.A403 WP316L is a grade for stainless steel in American Standard.

The connection methods of elbow and pipe include: direct welding (the most common method), flange connection, hot melt connection, electric fusion connection, thread connection and socket connection