Socket Weld Elbow Class 3000

SW elbow is used to socket with the end of pipe and welding on it.Socket weld elbow is belong to forged fittings which are used as high pressure fittings,SW fittings can be 2000lb,3000lb,6000lb.

What is a sockolet and what about its dimension chart.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. The use of Forged End Pipe Caps is common in many industries such as oil and gas industries, chemical industries and water supply lines.

The socket weld elbow is resistance corrosion/pitting/oxidation/stress corrosion cracking and crevice corrosion. Reducing elbows connect two pipes of different diameters to reduce the diameter when the pipe rotates.

Stainless steel socket weld couplings can be called simply as SS SW Couplings.ASME B16.11 forged fittings are the most used fittings all over the word because the American Standard are famous.Socket welded fittings can be provided 3000LB,6000LB,9000LB.

ASME B16.11 is the standard contains ratings, dimensions, tolerances, marking and material requirements for forged fittings, both socket-welding and threaded. Threaded fittings are available in pressure ratings Class 2000, 3000, and 6000; Socket welding fittings are available in pressure ratings Class 3000, 6000, and 9000.

What is a Socket Weld Outlet and what about its specification and advantages.

High Pressure Tube Fittings is available in Stainless Steel, Carbon Steel and Alloy Steel. Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

ASME B16.11 forged fittings are popular because of the famous American Standard and the variety products.Socket weld (SW) fittings and threaded (THD) fittings are both forged fittings.Stainless steel pipe fittings are always chosen in corrosive and chemical environments.

SW tee can socketed with the pipes and welding with the pipes.ASME B16.11 fittings are forged fittings according to American Standard.Tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

CL3000 socket weld tees are the most used pressure pipe fittings because of the wide using range.ASME B16.11 forged pipe fittings are including SW and THD fittings.

Socket Weld Coupling material can be divided into carbon steel, alloy steel and stainless-steel.
Socket welding Pipe fittings are available in pressure ratings Class 3000, 6000, and 9000.
There are various types of  socket-welding Tube fittings, such as Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, Union and Sockolet

Socket weld cross is a pipe fitting used to transport flow in the piping system.SW fittings are belong to forged steel pipe fittings,the other type of forged fitting is threaded fittings.Forged fittings are high pressure fittings used in many applications.

What is a Socket weld Uninon,what about its speicification and advantage

What is a Socket weld cross and what about its specificaton and advantange.

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

The branch pipe has two outlets and is perpendicular to the main pipe. It is used to change the direction of the pipe so that the pipe is 90 degrees perpendicular to the pipe.

Socket Weld Tee Material: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

Flush Bushing: Flush bushing are used in piping systems. They are installed in the pipe to reduce the size of the pipe. Forged bushing is ideal for use with water and oil in chemical, petrochemical, pulp, paper, shipbuilding, waste incineration, and semiconductor industry applications.

Equal  Elbow

Equal elbow is an elbow with the same diameter at both ends, which is characterized in that the pipeline connecting the two necks belongs to the same specification.

Reducing  Elbow

Reducing elbows connect two pipes of different diameters to reduce the diameter when the pipe rotates.

Socket Weld half Coupling is a coupling with a socket weld only at one end, It is usually welded directly to the pipeline to form a branch connection. Coupling for joining a pipe to another of smaller diameter. Straight coupling connects two pipes end-to-end. It is used to supplement the infinite aluminum pipe.

SW full coupling is used to connect two pipes.Couplings can be full coupling and half coupling.ASME B16.11 pipe fittings are forged fittings including SW fittings and THD fittings.Socket weld fittings have many pressures:CL3000,CL6000,CL9000.

Socket weld 45 deg lateral tees are belong to pipe tees,but is a special type of pipe tees.These lateral tees could change the direction in 45 degree of the pipes.