Slip On Flange Forged Flanges Supplier

It is used to insert the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s outer diameter, pipe and flange could be connected by lap welding at the top and bottom of the flange. The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange.

ASME B16. 5 pipe flanges: Weld Neck Flange ( WN),Slip-on Flange (SO), Threaded Flange (THD),Socket Weld Flange (SW),Blind Flange (BL),Lap Joint Flange (LAPJ),Plate flange (PL)

The difference between ASME/ANSI and API

The equal cross is one kind of the pipe cross,  the equal cross means all the 4 ends of the cross are in same diameter.
The reducing cross also is called unequal pipe cross , it is the pipe cross which the four branch ends are not in the same diameters.

Stainless steel slip on flanges are popular type of flanges because of the great material and flexible applications.Pressures of flanges:CL150,CL300,CL600,CL900,CL1500,CL2500.ASTM A182 F316L and ASTM A182 F304 are both popular grades of stainless steel.

Class 600 WN flange is a high pressure flange.Flanges have many pressures:CL300, CL600, CL900, CL1500, CL2500.ASME B16.5 is the American Standard for flanges.Flanges have five face types:RF RTJ FF MF TG.

A105 WN flange is a carbon steel flange according to ASME B16.5.STD is represents the thickness of the flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.Flanges have five face types:RF RTJ FF MF TG.

High pressure flange carbon steel material: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH

Slip on flange, also called SO flange. It’s a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be directly connected to equipment or pipe by fillet weld at the top and bottom of the flange. It is used to insert the pipe into the inner hole of the flange.

Large diameter flat welding flange has less high-pressure suitability compared to its weld neck counterpart. The basic ring style is suitable for the occasion of low pressure. The butt weld category of the flange is known as a weld neck flange. It suits the occasion of high temperature and pressure as defined in the ASME B16.47 code.

Threaded nipple is a short piece length of pipe or tube. Its size is specified according to the length of this section of pipe and the diameter. It can be with threaded or flat ends. And both ends can be the same or different.
There are two shape : threaded one end (TOE) and threaded both end ( TBE).

300LB Stainless Steel Flange is always be chosen because of the excellent anti-corrosive function,SS316 is one of commonly used grade for stainless steel.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

The connection method of A182 F11 socket flange is to insert the pipe into the socket of the flange, and then seal it with welding or use a sealing gasket. This connection method is relatively strong and can adapt to the thermal expansion and contraction of the pipe to a certain extent.

1500 LB SO flanges are belong to high pressure flanges.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.Flange dimension has a very large range to meet different demands.

300 LB BL flanges are used to close the pipe system,it is similar to plugs and caps.Stainless steel 304 flanges are the most used stainless steel flanges as SS304 have excllent functions and reasonable price.

What is a Spectacle Flange and what about its specification and advantages.

Stainless steel lap joint flange is a flange connection component, which consists of a flange, a flanged short section or a butt welding ring. Among them, the flange is made of stainless steel, which has good corrosion resistance, heat resistance and other properties.

Equal tee is one type of pipe fittings, also called straight tee which means the branch diameter is same with the main pipe (Run pipe) diameter.

Stainless steel 316L LAPJ flange has great anti-corrosive function,it always used with lap joint stub end of same material.ASME B 16.5 forged flange have soem pressures:CL150,CL300,CL600,CL900,CL1500,CL2500.You could find the comparison between LAPJ flanges,SO flanges and WN flanges below.

ASME B 16.5 2 inch socket weld (SW) flanges are used for small size and high pressure pipe systems.Stainless steel flanges are more expensive than carbon steel flanges because of the better functions.The pressures could be chosen:CL150,CL300,CL600,CL900,CL1500,CL2500.

Flange provides a long tapered hub for welding to pipes , it is used in high pressure systems and suitable for both cold and hot temperatures.

Blind flanges are used to seal the end of piping systems or pressure vessel openings.

flange type: Weld Neck Flange ( WN),Slip-on Flange (SO), Threaded Flange (THD),Socket Weld Flange (SW),Blind Flange (BL),Lap Joint Flange (LAPJ),Plate flange (PL)

What is a Weld Neck(WN) Flange and what about its specification and advantages.

This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

Some information abou SO Flange.

Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe.