Reducing Tee Butt Welded Pipe Fittings

Radius of Long Radius (LR) Elbows is 1.5 times the pipe diameter. Radius of Carbon Steel Short Radius Elbow is 1.0 times the pipe diameter. Carbon Steel Seamless Elbow are in demand for use between two lengths of pipe or tube allowing a change of direction, usually these elbows distinguished by connection ends.

90 degree steel pipe elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

This kind of elbow is classified by angle, and 45 degree elbow and 180 elbow is also very popular. And steel pipe elbow is also available in 60 degree, 30 degree and other special angle according to practical needs.

Carbon steel butt welded 90° elbows are belong to ASTM A234 WPB pipe fittingsBW 90 deg elbows could be made in two types:LR (Long Radius) and SR (Short Radius).The angle of pipe elbows are 45deg and 90 deg.Only 90 deg elbows have LR.

Carbon steel butt welding 90 degree elbow is a connector specially designed for use in piping systems. Its main function is to create a 90 degree turn in the pipe so that the fluid can flow along a predetermined path.

BW Reducing tee is one type of pipe tees,the other type is equal tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.Carbon steel fittings are used in many applications because of its great excellent functions.

Concentric BW reducer is one type of butt welded fittings.BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

Concentric reducers will change kindly between the pump and piping， A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

SS400 90 DEG elbow is used to transport flow in piping system.Butt welded fittings used welded connection to connect with the pipes to achieve the strong and premanent connection.

Steel pipe bend is belong to butt welded fittings.The bend radius R should greater than or equal to 3 times of the outside diameter.Bends could manufacture as the customize degree to meet the client’s demends.

a pipe bend’s dimension and its difference between an elbow.

BW tee is a commonly used fittings in BW fittings.Tees can also be threaded (THD) and socket welded (SW) tees to used in many different applications.Shanghai Zhuangcheng is an excellent pipe fittings manufacturer who can supply high quality pipe fittings in China.

Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

45 ° elbow is also called “45 elbow or 45 ell”, and its bending mode can change the flow direction of fluid / gas in the pipeline by 45 °. The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Welded steel pipes are popular because of the strong and permanent connection,the ends of the pipes can welded with flanges.Slip on (SO) flange can slip on the pipe,and then welded on the pipes.

There are two types of 90 deg elbows:LR (long radius),SR (short radius).45 deg eblows are also have wide applications,be attention,45 deg elbow only have LR type.Butt welded pipe fittings have the most large used range as it can be 1/2″ – 80″.

Carbon steel elbows are the most commonly used elbows in all the types and material elbows.Large dimensions elbow is butt welded fitting,you can find the butt welded fittings specification below.

Stainless steel tee has two types:Equal Tee and Redcuing Tee.These two types of tees have same functions,the only difference can reduce the flow in the piping system.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

ASME B16.9 Stainless Steel Butt Weld Cross Fittings The function of a cross is similar to that of a tee by means of the exception of providing two 90 Deg outlets opposite each other.

90 deg elbow is the most used degree in elbows,.Butt welded fittings including BW elbows which used welded connection to connect with pipes.There is also 45 degree elbows.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

SS 304/304L elbow is stainless steel pipe fitting.304/604L is the most commonly used grade of stainless steel in American Standard.Elbows can made as 90 deg and 45 deg.Among these,90 degree elbows can be LR and SR while 45 degree elbows only have LR type.

Butt weld elbow is a steel elbow formed by hot pressing or forging. Its connection form is to directly weld the elbow and steel pipe. Butt welded elbows have beveled ends to allow for ease of welding. This bevel allows for full penetration weld in most of the cases. Butt welded elbows are mainly used for elbow with higher pressure and temperature.

Butt welded fittings,can be abridged as BW fittings.Butt welded means the pipe fittings used welded connection to connect with pipes.BW fittings including Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End.Carbon steel always be the material of these fittings as carbon steel has great functions and affordable price.

According to its radius of curvature, it can be divided into long radius elbow and short radius elbow. Long radius elbow means that its radius of curvature is equal to 1.5 times the outer diameter of the pipe, that is, r = 1.5D. Short radius elbow means that its radius of curvature is equal to the outer diameter of the pipe, that is, r = 1.0d.

According to the production process, it can be divided into: welding elbow, stamping elbow, pushing elbow, casting elbow, butt welding elbow, etc. Other names: 90 degree elbow, right angle bend, etc.