Radius elbow 90 A105 Pipe Fittings

Concentric reducers are easy to transport mud and grinding fluid and are suitable for corrosive operations , It will change kindly between the pump and piping.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

BW reducer can be concentric (COC) reducer and eccentric (ECC) reducer.The main difference is the internal structure.COC and ECC types reducers could meet different demands in many applications.You could find the summary “COC VS ECC” in the content below.

Steel pipe tee is a pipe fitting used to tansport the flow in the piping system.Carbon steel fittings are used in many applications becasue of its great excellent functions.

ASME B16.9 elbow means BW elbow.ASME B16.9 is an American Standard for Butt welded fittings,A234 WP22 is represnets BW Alloy pipe fittings. Elbows can be 90 deg and 45 deg to change the pipes in 90 degree or 45 degree.Sometimes the elbows can be 180 deg to satisfy the clinet’s demands.

What is a 90 DEGREE LR ELBOW and what about its specification and advantages.

The function of an elbow and What is the difference between LR and SR elbow?

Concentric reducer’s dimnesions and its usage and advantage

24IN carbon steel BW elbows are large dimension fittings,ASME B16.9 is represents butt welded fittings in American Standard.Carbon steel fittings are used in many applications because of its great excellent functions.

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

This kind of elbow is classified by angle, and 45 degree elbow and 180 elbow is also very popular. And steel pipe elbow is also available in 60 degree, 30 degree and other special angle according to practical needs.

These types of tube fittings like male elbows and female elbows have been specifically designed for use on instrumentation, process and control systems and equipment employed in chemical, petroleum, fluid power, electronic and pulp and paper plants.

Elbows are split into two groups which define the distance over which the flowing fluid change direction; the center line of one end to the opposite face. This is known as the “Center to Face” distance and is equivalent to the radius through which the elbow is bent.

Carbon steel reducer is a commonly used BW fitting.Butt welded pipe fittings used welded connection to connect with pipes in piping systems.These BW fittings are popular because of the strong and permanent connection.Carbon steel is the most used material in many applications because of the great functions and affordable price.

Buttwelding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS

5in SW elbow is used to socketed with pipes and then welded on pipes.ASME B16.11 pipe fittings mean forged pipe fittings.Forged pipe fittings can be divided in socket weld fittings and threaded fittings.

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories.

Alloy steel butt-weld pipe caps are mainly used to close pipeline systems to ensure that the fluid in the pipeline will not leak.It is usually welded at the end of the pipeline to provide a reliable sealing effect.

Concentric reducer’s dimnesions and its usage and advantage

45 degree elbow is second common use after 90 degree elbow. The function of a 45 degree elbow is the same as a 90 degree elbow, but the measurement of dimensions is different to that of the 90 degree elbow.

304/316L BW tees are the most used tees in stainless steel tees.304/316L are the most used grades in American Standard.Tees can be Equal Tees and Reducing Tees.You could find the summary “Equal VS Reducing Tee” in the content below.Stainless steel pipe fittings are populat because of the excellent functions of corrosion resistance.

Carbon Steel: Q235, 20#, 35#, 45#, 20G,ASTM A234 WPB/WPC
Low Temp Carbon Steel: Q345B, 16Mn, ASTM A420 WPL6
Pipeline Steel: ASTM A860 WPHY 42 / 46 / 56 / 60 / 65
Alloy Steel: ASTM A234 WP11 / WP12 / WP 5 / WP9 / WP91 / WP92,15CrMoG, 12Cr1MoVG, 12Cr5Mo, 1Cr5Mo, Cr9Mo, 10CrMo910, 12CrMo4-5
Stainless Steel: ASTM A403 WP304/304L/304H, 316/316L, 310S, 321, 317,347,904L
Duplex Stainless Steel: ASTM A815 S32205, S31803, 32750, 32760

What is a straight and reducing tee and Dimensions and Standards

Stainless concentric reducer is belong to BW (butt welded) fittings.Reducer can be two types:Concentric (COC) Reducer and Eccentric (ECC) Reducer.The main difference of these two typws are the internal structure.Stainless steel pipe fittings have better functions than other material pipe fittings.

BW reducers have two types:Concentric Reducer and Eccentric Reducer.These two types can meet different demand.This is stainless steel BW COC reducer in the picture.Stainlee steel is better in corrosion resistance,so the used years will be longer than other matercial.

Butt welded elbow is a pipe fitting which used welded connection to connect with the pipes in piping system.BW elbbows have two degrees to choose:90 deg elbow and 45 deg eblbow.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree.