MSS SP-97 Threadolet NPT Pipe Fittings

Threaded coupling is used to connect two pipes with threaded connection.Forged steel pipe fittings can divided into SW (socket weld) fittings and THD (threaded) fittings.

Carbon Steel A105 Threaded Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Threaded pipe fittings provide permanent welded connections for pipes. Threaded joints probably represent the oldest method of joining piping systems. Same as Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.
They are available in three pressure ratings: 2000lbs, 3000lbs and 6000lbs.

Threaded Pipe Fittings Specification
Shape: Elbow,Tee, Cross, Coupling, Cap, Swage Nipple, Bushing, Plug, Nipple, Union, Hex Nipple,Threadolet.
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Rating: Class 2000lbs, 3000lbs, 6000lbs
Thread Type: NPT, PT, BSPP, BSPT, PF
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

Pipe Swage Nipple (also known as reducing nipple) is divided into tubing sub and casing sub. Flanging nipple in pipe connection is commonly used with flange.

Shapes:

Concentric: Concentric swage nipple is mainly used for vertical pipeline.

Eccentric: eccentric swage nipple is mainly used in horizontal pipelines.

There are various types of ASME B16.11 socket-welding fittings, such as Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, Union and Sockolet; while ASME B16.11 threaded fittings can be furnished in product forms of Elbow, Cross, Tee, Coupling, Half Coupling, Boss, Cap, plug and bushing.

Threaded couplings could be divide into full coupling (both ends threaded) and half coupling(one end threaded,the other end welded).Forged pipe fittings dimensions are all in small size,1/8″-4″.

Shanghai Zhucheng is well known manufacturer of MSS SP-83 Union, consists of three parts: a nut, a female end and a male end. Our offered Threaded Pipe Union similar to a coupling, allows the convenient future disconnection of pipes for maintenance or fixture replacement. Threaded Reducing Union makes easy connection and disconnection, multiple times whenever we need.

In general, carbon steel pipe fittings and flanges are widely used for applications which do not require materials with higher resistance to corrosion such as stainless steel and alloy steel. Carbon Steel Fittings is primarily used across piping systems for its hardness, moderate to good tensile strength and inexpensiveness.

SS316L Threaded Pipe fittings provide permanent welded connections for pipes. Threaded Steel Coupling is a short piece with screw in NPT or BSP ends or one end.

Forged threaded pipe fittings are named by its manufacturing forging process and produced according to ASME B16.11, MSS-SP-79\83\95\97 and BS3799 standards. It is a connector in between nominal bore pipes. Their material can be made of carbon steel A105 and stainless steel SS316 & 304.

Threadolet considered to a threaded fitting, and it is manufactured in 3000 and 6000 classes. t typically is in the size range of 1/2″ to 2” and is welded over a hole either drilled or burned in the pipe.

We manufacture and export High Pressure Pipe Fittings. Threaded Coupling is usually packaged by wooden case.

The center lines of the two pipes connected by concentric reducers are on a straight line, mainly used for vertical pipelines; Eccentric reducers are often used in horizontal pipelines

The threaded pipe union is similar to the coupling and can be flexibly disassembled when it needs to be repaired or replaced. The reducing threaded union is easy to disconnect and link, and can be operated multiple times.

Steel pipe elbow can be divided into 3 types as buttweld, threaded, socket weld in accordance with connection. The material specification are ASTM A234, A182, A403, A105, A694, A350, A420 and A860.

The body of the branch abutment is made of high-quality forgings, which are made of the same materials as the pipes, including carbon steel, alloy steel, stainless steel, etc. The branch pipe seat and the main pipe are welded

Class 3000 threaded union is the most used pressure of threaded union.ASME B16.11 is the standard for forged fittings according to American Standard.

What is a Threaded nipple and what about its specification and advantages.

Carbon steel threaded tee is a pipe connector made of carbon steel material, with three threaded interfaces, used to connect three pipes, one of which is used as a branch port. It realizes the medium diversion in the pipeline system and ensures the normal operation of the pipeline system.

Used for all sorts of media: chemical substances, petrochemical products, liquefied gas – especially in loading/unloading applications. There are also couplings intended for highly aggressive chemical substances, lined with ECTFE – a polymer resistant to chemicals.

90° Steel Pipe Elbow is the most commonly used elbow type in pipe system with the function to change the direction of fluid in 90 degree. It connects pipes with same or different diameter.

They are concentric and eccentric available, with various ends. The most common types are:

PBE nipple = Plain Both Ends
BBE nipple= Beveled Both Ends
TBE nipple= Treaded Both Ends

SS304 90 deg elbow is a stainless steel pipe fitting used to changes the direction of the flow in 90 degree.Threaded steel pipe fittings are a type of forged steel pipe fittings.The other forged fitting is SW pipe fitting.