MSS SP 43 Stainless Steel A403 WP304L Butt Weld Fitting Concentric Reducer Mnufacture

316L 90 deg elbow is a stainless steel pipe fitting which can used in chemical environment because of its an-ti corrosive function.SCH 10S is repersents to the wall thickness in butt welded fittings. Commonly used wall thickness is SCH 40 and SCH 80.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Carbon steel pipe fittings are used in many applications because of its great excellent functions.Carbon steel pipe fittings can manufactured as THD (threaded) fittings,SW (socket weld) fittings and (BW) butt welded fittings.The specifications are in the content below.

Pipe elbows are fitting accessories which are used widely in various industrial sectors in pipe fitting. A pipe elbow is frequently used in pressurized applications and are available in various shapes and sizes for use in different applications. A pipe elbow is a fitting installed between two lengths of pipe or tube allowing a change of direction, usually in the 90° or 45° direction.

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on.
In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

Concentric reducer’s dimnesions and its usage and advantage

Concentric reducer is used to join pipe sections or tube sections on the same axis The length dimension of the reducer is almost equal to the average of the big bore and smaller bore pipe diameters.

Spiral wound gasket (SWG) is a fitting used with flanges.ASME B16.20 is the American Standard for gasket.

Pipe tee is a commonly used pipe fittng used to branch the flow in piping systems.There are two types of tees:Equal Tees and Reducing Tees.SCH XS is a wall thickness of butt welded fittings,SCH XS is large wall thickness which can resists higher perssure.The most used wall thicknesses are SCH 40 and SCH 80.

The function of an end cap is to block off the end of a line a piping system, This is achieved by placing the end cap over the open line and welding around the point.

A pipe reducer is the type of pipe fitting which helps to join two pipes with different diameters. There are various material for The pipe reducers as per the demands of industries and also available in many dimensions.

Butt welded elbow is a pipe fitting which used welded connection to connect with the pipes in piping system.BW elbbows have two degrees to choose:90 deg elbow and 45 deg eblbow.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

90 deg long radius elbow is a commonly used type in elbows.There are aslo 90 degree short radius elbow and 45 degree elbow.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

SS 316L elbow has better corrosion resistance than other material elbows.Butt welded fittings will use welded connection to connect with pipes,so these fittings have great anti leakage function.SS316L elbows always be chosen because of its excellent functions so that it can be used in many years.

Butt weld fittings are manufacture by seamless or welded pipe. For pipe fittings manufacturers, the forming process of welded pipe and seamless pipe is basically same. Butt welded fittings can be divided into carbon steel butt welded fittings and stainless-steel butt-welded fittings

What is a latera tee and the difference between a wye and a lateral?

Carbon Steel Pipe Fittings Elbow is a most common type of CS fitting used to join pipe or tubing to allow a change of direction, usually a 90° or 45° angle, Elbows ends may be machined for butt welding , threaded , or socketed

45 degree elbow is widely used in chemical industry, food, water supply facilities, electronic industry, chemical pipeline, horticulture, agricultural production, solar equipment pipeline, air conditioning pipeline and other fields.

Steel pipe bend is belong to butt welded fittings,bends have some similar usages as elbows.However,bends can be customized by clients to satisfy different demands.

BW tees and reducers are the most used pipe fittings in the piping system.Tees can branch the flow in piping systems.Carbon steel pipe fittings are popular as the great functions and affordable functions.

Butt welded cross is pipe fitting used to transport the flow in piping systems.BW cross can connect four pipes vertically with welded connection.Cross can be two types:Equal and Reducing.These crosses have similar functions,but reducing tees can reduce the flow while equal tees can not.

3/4in BW tee is a normally used fitting in butt welded fittings.A403 WP321 is a grade for stainless steel.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

DN950 long radius elbow is one type of large dimension elbows,there is also short radius elbow to choose.ASME B16.9 elbow is butt welded elbow according to American Standard.

The butt welded eccentric reducer is a pipe fitting used to connect pipes of different diameters, and its central axes do not overlap, and there is an eccentricity.

DN1400 BW elbow is a very large size in pipe fittings.The size of fittings are important for piping systems.Carbon steel fittings are used in many applications because of its great excellent functions.

classification,dimension of lateral tee,and its difference from a WYE.