Low Temp Carbon Steel 90 Degree steel pipe fittings Elbow

If the radius is the same as pipe diameter (Center-to-Face dimension of 1.0 X diameter ), it called Short Radius Elbow (SR elbow) used normally for low pressure and low speed pipelines or in tight areas where clearance is the main issue. If the radius is larger than pipe diameter (Center-to-Face dimension of 1.5 X diameter) then we call it a Long Radius Elbow (LR Elbow) used for high pressure and high flow rate pipelines.

BW 90 deg elbow is the most used type of elbows in many industries.Schedule 80 is represents the wall thickness of the butt welded fittings.It is a commonly used wall thickness.another wall thickness is SCH 40.

BW carbon tee are popular because carbon steel has great functions and cheap price.Coated pipe fittings also used in piping systems as the coating can enhance the functions for normal carbon steel.Galvanized coating is the most used coating,it can enhance the anti-resistance function.

The stub end is usually a short section of pipe fittings, with one end being a flap structure, and the other end can be a stub end or special processing according to specific needs. The turning part is designed to facilitate the connection with other pipe fittings or equipment.

Steel pipe bend is a butt welded fitting to transport fluids or gas.The degree of steel bend will be customize according to the client’s demend.Pipe bend and elbow have some similarity,you could find the summary “pipe bend VS elbow” below.

A Reducing Tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes. In this, the branch port size is smaller than the other ports of the run.

A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

These types of tube fittings like male elbows and female elbows have been specifically designed for use on instrumentation, process and control systems and equipment employed in chemical, petroleum, fluid power, electronic and pulp and paper plants.

Concentric reducers are tapered and are used when the diameter between pipes changes. It can be axially shifted and externally reconfigured to offer more efficient reducer connection.

The pipes cannot appreciate because of what the external arrangement of the pipe reducer seems but the flow of the pipe is changed by the internal width conical transition arrangement. It can be axially shifted and externally reconfigured to offer more efficient reducer connection. Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Butt welded tee can be equal type and reducing type.Both types can change the direction of the piping system in 90 deg.In addition,the reducing tees can reduce the flow of the fluids or gas.Shanghai Zhucheng is an excellent pipe fittings manufacturer from China who supply high quality fittings for years.

According to its radius of curvature, there are long radius elbow and short radius elbow. Long radius elbow refers to its radius of curvature is equal to 1.5 times the outside diameter of the pipe, that is, R=1.5D; A short radius elbow means that its radius of curvature is equal to the outer diameter of the pipe, that is, R= 1.0d.(D is the diameter of the elbow, and R is the radius of curvature).

ASME B16.9 elbow means BW elbow.ASME B16.9 is an American Standard for Butt welded fittings,A234 WP22 is represnets BW Alloy pipe fittings. Elbows can be 90 deg and 45 deg to change the pipes in 90 degree or 45 degree.Sometimes the elbows can be 180 deg to satisfy the clinet’s demands.

ASME B16.9 butt welded fittings are American Standard BW fittings.COC Reducer means concentric reducer,BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

90 degree steel pipe elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. It is the common degree in all the pipeline systems and used most in all different degree of elbows

BW equal tee is always used in piping system to branch the pipes.ASME B16.9 Pipe Fittings are butt welded fittings in American Standard.Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

Alloy steel butt-weld pipe caps are mainly used to close pipeline systems to ensure that the fluid in the pipeline will not leak.It is usually welded at the end of the pipeline to provide a reliable sealing effect.

90 deg stainless steel elbow is a popular type of elbows.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.Shanghai Zhucheng is an excellent pipe fittings manufacturer who supplys high quality pipe fittings and flanges for years.

316L 90 deg elbow is a stainless steel pipe fitting which can used in chemical environment because of its an-ti corrosive function.SCH 10S is repersents to the wall thickness in butt welded fittings. Commonly used wall thickness is SCH 40 and SCH 80.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

BW equal tees are the most used tees in the all types of tees.There are equal tee and reducing tee.Galvanized carbon steel pipe fittings have better corrosion resistance than carbon steel fittings.

The function of butt weld elbow is to change direction or flow in a piping system. There are the 45°, 90° and 180° .
According to the material, it can be divided into carbon steel, alloy steel and stainless-steel.
According to its radius of curvature, there are long radius  and short radius butt weld elbow.

A403 WP304  eccentric reducer is a pipe fitting used to connect pipes of different diameters, and the central axes do not overlap, which means there is an eccentricity. The eccentric reducer has two ends, one with a larger diameter and the other with a smaller diameter.

Butt welded elbow is a pipe fitting which used welded connection to connect with the pipes in piping system.BW elbbows have two degrees to choose:90 deg elbow and 45 deg eblbow.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

Elbows are split into two groups which define the distance over which the flowing fluid change direction; the center line of one end to the opposite face. This is known as the “Center to Face” distance and is equivalent to the radius through which the elbow is bent.