Lateral Tee Galvanized Steel Pipe Fittings

90 deg elbow is the most used degree in elbows,.Butt welded fittings including BW elbows which used welded connection to connect with pipes.There is also 45 degree elbows.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

Steel pipe elbow is a key part in a pressure piping system used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of 45 degree or 90 degree. This change in fluid flow direction adds pressure losses to the system due to impact, friction and re-acceleration.

ASME B16.9 cross is a pipe fitting used to connect four pipes together, and the connection is achieved by welding. It plays a role in diversion or confluence in the pipeline system and is an important connector in the pipeline layout.

BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.Stainless pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

What is a steel pipe tee and what about its standard

SR (short radius) elbow is only for 90 deg elbow.SCH XXS is the biggest wall thickness in butt welded fittings.The commonly used wall thicknesses:SCH 40 , SCH 80.The wall thickness more bigger,the bearded pressure of the fittings can be higher.

SS 316L elbow has better corrosion resistance than other material elbows.Butt welded fittings will use welded connection to connect with pipes,so these fittings have great anti leakage function.SS316L elbows always be chosen because of its excellent functions so that it can be used in many years.

What is a 90° pipe elbow and what its application

Steel Pipe Elbow is the most common pipe fitting that changes the direction of the pipeline. It plays a important role in the piping system.

Concentric BW reducer is one type of butt welded fittings.BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

Butt welded lateral tee is a special type of BW tees.It is different from the normal tees as the lateral tee can change the direction of the pipe system in 45 degree.Carbon steel fittings are the most used fittings as carbon steel material has great functions and affordable price.

Equal butt weld elbow is used to change the direction of the flow in piping system.SCH 80 is a commonly used wall thickness for butt welded fittings,the other commonly used wall thickness is SCH 40.

Carbon steel elbow dimensions are different depend on the type of the elbow.BW elbows can be 1/2″-80″;SW elbow and THD elbow can be 1/8″-4″.Elbows can be made from carbon steel,alloy steel and stainless steel.Shanghai Zhucheng is an experienced pipe fittings manufacturer for many years.

Equal diameter tee, also known as straight tee, the branch diameter of the tee is the same as the pipe diameter of the tee. The three branches of tee have same diameters.

ASME B16.9 BW 90 elbow is pipe fitting manufactured according to American Standard.ASME B16.9 is American Standard of butt welded fittings.There is BW elbow in the picture,you could find the specification and dimensions below.

An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.

Alloy steel butt-weld pipe caps are mainly used to close pipeline systems to ensure that the fluid in the pipeline will not leak.It is usually welded at the end of the pipeline to provide a reliable sealing effect.

BW elbows have the most wide used range in all types of elbows.Shanghai Zhucheng is an excellent supplier for pipe fittings,all the fittings made from carbon steel and alloy steel will have anti-rust paint,and stainless steel fittings will have anti-rust oil to protect the fittings in the sea transportation.

24IN carbon steel BW elbows are large dimension fittings,ASME B16.9 is represents butt welded fittings in American Standard.Carbon steel fittings are used in many applications because of its great excellent functions.

Carbon steel elbows are the most commonly used elbows in all the types and material elbows.Large dimensions elbow is butt welded fitting,you can find the butt welded fittings specification below.

45 deg elbow has three types:BW,SW,THD.Among these,The commonly used elbows can be 45 deg and 90 deg.BW (butt welded) 90 degree elbows have LR (long radius) and SR (short radius) while 45 degree elbows only have LR type.

Butt Weld Fittings are manufacture by seamless or welded pipe. For pipe fittings manufacturers, the forming process of welded pipe and seamless pipe is basically same. Butt welded fittings can be divided into carbon steel butt welded fittings and stainless-steel butt-welded fittings.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Reducing tee a one of the type of tees,the other type is equal tee.these two types tees have similar functions,but the reducing tees can reduce the flow.Shanghai Zhucheng is an excellent Pipe fittings manufacturer who supplys high quality fittings for many years.

A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Elbow connectors can link pipes to avoid water leakage and air leakage between pipes.

45 deg elbow is a type of elbows.These elbows have similar functions to 90 degree elbow,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.Shanghai Zhucheng is an excellent stainless steel pipe fittings supplier who supplys high quality pipe fittings and flanges for years.

ASME B 16.9 lateral tee is one special type of BW tees.It has similar functions to the normal tee,the only difference is the lareral tee can change the direction in 45 degree while the normal one changes in 90 degree.