High pressure Pipeline Steel A860 WPHY42 DN15-2000 Straight Tee

The function of a 45 degree elbow is the same as a 90 degree elbow, but the measurement of dimensions is different to that of the 90 degree elbow.Compared to 90 degree elbow, 45 degree elbow produces less friction, and with the lower pressure.

Butt weld elbow is the most used type of elbows.It can welded with the pipes to achieve strong and permanent connection.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel fittings can used over 50 years.

The elbow radius mean curvature radius. If the radius is the same as pipe diameter, it called short radius elbow, also called SR elbow, normally for low pressure and low speed pipelines. If the radius is larger than pipe diameter, R ≥ 1.5 Diameter, then we call it a long radius elbow (LR Elbow), applied for high pressure and high flow rate pipelines.

Concentric reducer is used to join pipe sections or tube sections on the same axis. It is cone-shaped, and is used when there is a shift in diameter between pipes. A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.

What is a 90 DEGREE LR ELBOW and what about its specification and advantages.

The long radius is used most commonly, and it is also the default radius. When it is the place with the high pressure or the high flow rate, the long radius elbow is usually used. If the resistance requirements of the solid transmission pipeline are strict, the larger radius elbows will be used.

What is a STEEL PIPE TE and what about its specification and advantages.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Radius of Long Radius (LR) Elbows is 1.5 times the pipe diameter. Radius of Carbon Steel Short Radius Elbow is 1.0 times the pipe diameter. Carbon Steel Seamless Elbow are in demand for use between two lengths of pipe or tube allowing a change of direction, usually these elbows distinguished by connection ends.

Stainless 90 deg elbow has better anti-corrosive function than other material elbows.90 degree elbow can be two types: LR (long radius) and SR (short radius).Elbows can also be 45 degree,but 45 deg elbow only has LR type.

Steel pipe elbows have seamless and welded version, normally in 90 degree, 45 degree & 180 degree. Material are carbon steel, alloy steel & stainless steel. BW 90 degree elbow is formed by hot forming and connects steel pipes or other pipe fittings through butt welding process

BW 90 degree elbow is formed by hot forming and connects steel pipes or other pipe fittings through butt welding process. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

Pipe Elbow is installed between two long pipes for changing the direction of the flow of liquid or fluid. These are commonly available in two types; 90 degrees and 45 degrees. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

What is a pipe Tee,its specification and importance.

BW ELBOW are installed between different lengths pipe or tubing. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

SSAW steel pipe in the production process, we need to pay attention to a series of matters. Except for the following test items, according to the API standard and other relevant standards and the special requirements of some users, but also the need for steel, steel pipe and other tests Destructive tests, including physical and chemical properties of the raw materials into the plant sampling, visual inspection of 100% steel .

Elbows and seamless elbows are often used in the bending parts of pipes to change the direction of pipes Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

BW tees and elbows are both commonly used pipe fittings used to transport flow in piping system.Stainless steel pipe fittings re popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

There are two types of 90 deg elbows:LR (long radius),SR (short radius).45 deg eblows are also have wide applications,be attention,45 deg elbow only have LR type.Butt welded pipe fittings have the most large used range as it can be 1/2″ – 80″.

Carbon steel elbow has two degrees:90 deg and 45 deg.In real application,90 deg is more used type.90 deg elbow can be long radius (LR) and short radius (SR) while 45 deg elbow only has long radius (LR).

A equal tee’s usage,dimension and features.

Pipe tees can be two types:Reducing Tee and Equal Tee.Both types of tees can branch the pipes in the piping systems.Schedule 40 is a wall thickness of the butt welded fittings,the commonly used schedules are SCH 40,SCH 80.

BW tees and reducers are the most used pipe fittings in the piping system.Tees can branch the flow in piping systems.Carbon steel pipe fittings are popular as the great functions and affordable functions.

Reducing tee is a commonly used fittings to branch the pipes and reduce the flow in the piping systems.Large dimension is for butt welded fittings.ASME B16.9 pipe fittings are BW fittings according to American Standard,the size range for the ASME B16.9 fittings is 1/2″-80″.

ASTM A403 Stainless Steel Butt Weld 45 Degree Elbow refers to the material of forged and rolled austenitic stainless fittings for pressure pipes. Common grades are WP304/L, WP316/L. They can be used into many fields as engineering industry, energy conversion plants etc. ASTM A403 WP304, WP316 Elbow are buttweld fittings made for austenitic stainless steel applications with forged material.

Difference between a pipe elbow and a pipe bend is as follows: