Forging socket welding elbow 90 deg ASME B16.11

Socket Weld Fittings Specification
Shape: Elbow, Tee, Cross, Coupling, Union, Cap, Reducing Insert, Sockolet
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

ASME B16.11 forged fittings are popular because of the famous American Standard and the variety products.Socket weld (SW) fittings and threaded (THD) fittings are both forged fittings.Stainless steel pipe fittings are always chosen in corrosive and chemical environments.

SW tees have two types:Equal and Reducing.SW fittings have same ranges of size(1/8”-4”) and pressures(2000lb,3000lb,6000lb,9000lb).Class 3000 is the most common used among these pressures.Class 3000 can be labeled as 3M,where M means 1000,class 3000 fittings can withstand up to 3000 PSI.

SW elbow is used to socket with the end of pipe and welding on it.Socket weld elbow is belong to forged fittings which are used as high pressure fittings,SW fittings can be 2000lb,3000lb,6000lb.

It is usually welded directly to the pipeline to form a branch connection. Couplings do not normally allow disconnection of shafts during operation, however there are torque-limiting couplings which can slip or disconnect when some torque limit is exceeded.

A Socket Weld Tube Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. Once correctly inserted, fillet type sealing welds are applied to join the pipe to the fitting.

Socket Weld 90 Degree Elbow makes 90°changes of course within the run of pipe to create a channeling framework. Socket Weld 90 Elbow is planned for wide utilize totally different industries like oil refineries, chemical processing, petrochemical, and numerous other businesses.

Socket Weld Fittings Specification
Shape: Elbow, Tee, Cross, Coupling, Union, Cap, Reducing Insert, Sockolet
Size Range: 1/8″ –  4″ / DN6 – DN100
Pressure Rating: Class 3000lbs, 6000lbs, 9000lbs
Standard: ASME B16.11, BS3799, EN 10241, MSS SP-83, MSS SP-97

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

What is a Socket Weld Outlet and what about its specification and advantages.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

There are two types of tees:Equal Tee and Reducing Tee.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

What is a SW coupling and what about its size and specification

Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

Carbon Steel: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH
Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.
Duplex Stainless Steel: ASTM A182 F51, F53, F44

High Pressure Tube Fittings is available in Stainless Steel, Carbon Steel and Alloy Steel. Different from buttweld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally, for piping whose nominal diameter is NPS 2 or smaller.

Socket welded elbow can socket with pipes and welded on pipes.SW fittings are belong to forged fittings,the other type of forged fitting is threaded fittings.Forged fittings are high pressure fittings used in many applications.

SW tee can socketed with the pipes and welding with the pipes.ASME B16.11 fittings are forged fittings according to American Standard.Tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

ISO certified manufacturer of high pressure steel pipe fittings attract client with our best quality, service and competitive price.

What is a Socket weld Uninon,what about its speicification and advantage

What is a SW fiting and how about a SW Elbows’ specification?

There are various grade for Stainless Steel Forged Pipe Fittings: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317, 347, 904L，1.4404, 1.4437.