Forged Steel Flanges

A182 F304 slip on flange include flanges, bolt holes and sealing surfaces. The flange is a flat ring structure with an outer diameter larger than the outer diameter of the pipe connected to it. The bolt holes are evenly distributed on the flange and are used to install bolts to connect two flanges.

A182 F316‌ lap joint flange uses flanges, steel rings, etc. to put the flange on the pipe end, so that the flange can move on the pipe end. The steel ring or flange is used as a sealing surface, and the flange is used to press them tightly.

P280GH weld neck flange refers to a flange connection method that uses P280GH material as the base material and forms one or more layers of P280GH material welding layers on the flange surface through the butt welding process to improve the flange’s high temperature resistance, high pressure resistance and corrosion resistance.

Threaded flange is a non-welded flange that is made by processing the inner hole of the flange into pipe threads and matching with the threaded pipe to achieve connection. The connection method is to match the inner hole of the flange with the thread on the pipe, and then rotate and connect them together.

A234 WPB blind flange is a type of flange widely used in pipeline systems. A234 is the standard number of the American Society for Testing and Materials (ASTM), and WPB indicates that this material is a carbon steel pipeline component for medium and low temperatures.

The connection method of A182 F11 socket flange is to insert the pipe into the socket of the flange, and then seal it with welding or use a sealing gasket. This connection method is relatively strong and can adapt to the thermal expansion and contraction of the pipe to a certain extent.

A105 FF slip on flange is a commonly used pipeline connection element, mainly made of carbon steel, and connected to pipelines or other flanges by flat welding. The structure of the slip on flange is relatively simple.

Stainless steel lap joint flange is a flange connection component, which consists of a flange, a flanged short section or a butt welding ring. Among them, the flange is made of stainless steel, which has good corrosion resistance, heat resistance and other properties.

The spectacle blind flange is named because its shape resembles the number “8”. One end is a blind and the other end is an iron ring. However, the diameter of the throttling ring is the same as the diameter of the pipe and does not play a throttling role. This design makes the spectacle blind flange uniquely flexible and practical in the pipeline system.

Class 150 F316 slip on flange is a common pipe connection element, mainly made of stainless steel material, through slip on and pipe or other flanges are connected. slip on flange is generally composed of flange plate, bolt hole and sealing surface.

ASTM A350 LF2 is a low temperature carbon steel material, mainly used to manufacture flanges and other connectors. This material has good low temperature performance and corrosion resistance, and is suitable for use in low or ultra-low temperature environments.

Stainless steel socket flanges are installed during pipeline construction and connected to another pipeline through bolts to achieve a tight connection of the pipeline.

Stainless steel weld neck flange is a part widely used in pipeline engineering. The diameter and wall thickness of the pipe at the interface end are the same as the pipe to be welded, and the connection of the pipe is realized by welding.

ASTM A350 LF2 Blind Flange is a common low-temperature carbon steel material, mainly used in the manufacture of low-temperature and high-pressure forged pipe fittings and flanges.

These Stainless Steel A182 Threaded Union are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

A swage nipple is something similar to that of a reducer but it is used to join the butt welded pipe with a socket welded or screwed pipe.Like the reducer,swage nipple is also available with two variations:concentric swage nipple and eccentric swage nipple.The swage nipple generally adopts the MSS SP-95 or the BS3799 Standard.

ASTM A105 threaded fittings is commonly used carbon steel grade which is used to manufacture forge piping components such as forged fittings and flange of small diameter piping, generally for piping whose nominal diameter is NPS 2 or smaller.

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

Threaded nipple is a short piece length of pipe or tube. Its size is specified according to the length of this section of pipe and the diameter. It can be with threaded or flat ends. And both ends can be the same or different.
There are two shape : threaded one end (TOE) and threaded both end ( TBE).

The equal cross is one kind of the pipe cross,  the equal cross means all the 4 ends of the cross are in same diameter.
The reducing cross also is called unequal pipe cross , it is the pipe cross which the four branch ends are not in the same diameters.

The equal cross is one kind of the pipe cross,  the equal cross means all the 4 ends of the cross are in same diameter.
The reducing cross also is called unequal pipe cross , it is the pipe cross which the four branch ends are not in the same diameters.

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.
The Alloy Steel A182 Threaded Elbow material grade contains ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22.

Threaded Flanges are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe.

The difference between ASME/ANSI and API