Equal Tee Stainless Steel Fittings

A234 WPB BW tee is a commonly used pipe fitting to transport flow in piping system.There are two tpyes of tees:Equal Tee and Reducing Tee.SCH 80 is a commonly used wall thickness for butt welded fittings,the other commonly used wall thickness is SCH 40.

What is a pipe bend,what about its specification and its difference between a elbow

Concentric reducer’s dimnesions and its usage and advantage

45 deg elbow can be butt welded elbow and forged elbow.Forged elbows are including SW (socket weld) elbow and THD (threaded) elbow.Stainless steel pipe fittings are popuar because stainless steel has excellent corrosion resistance,stainless steel has using age over 50 years,so the material is more expensive than other materials.

90 degree steel pipe elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

BW equal tee is a commonly used tee in many applications.There is also reducing tees to choose.These tees have same functions,the only difference is the reducing tees can reduce the flow in the pipe system.There are the tee specifications in content below.

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on.
In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

Connect two pipes with the same or different nominal diameters to make the pipeline turn at 90 degrees, 45 degrees, 180 degrees and other angles

It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D. Most elbows are available in short radius or long radius variants. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.

Carbon steel elbows are curved connecting pieces that join straight lengths of pipe, commonly at a 90° or 45° angle, allowing obstructions to be avoided in plumbing, ventilation, welding, and automotive applications.

Butt weld fittings are manufacture by seamless or welded pipe. For pipe fittings manufacturers, the forming process of welded pipe and seamless pipe is basically same. Butt welded fittings can be divided into carbon steel butt welded fittings and stainless-steel butt-welded fittings

BW reducer can be concentric (COC) reducer and eccentric (ECC) reducer.The main difference is the internal structure.COC and ECC types reducers could meet different demands in many applications.You could find the summary “COC VS ECC” in the content below.

Carbon steel elbow has two degrees:90 deg and 45 deg.In real application,90 deg is more used type.90 deg elbow can be long radius (LR) and short radius (SR) while 45 deg elbow only has long radius (LR).

90° Steel Pipe Elbow is the most commonly used elbow type in pipe system with the function to change the direction of fluid in 90 degree. It connects pipes with same or different diameter.

24IN carbon steel BW elbows are large dimension fittings,ASME B16.9 is represents butt welded fittings in American Standard.Carbon steel fittings are used in many applications because of its great excellent functions.

These types of tube fittings like male elbows and female elbows have been specifically designed for use on instrumentation, process and control systems and equipment employed in chemical, petroleum, fluid power, electronic and pulp and paper plants.

oncentric reducers are beneficial to use where different ratings and to wear protection is required in conveying between flanges or pipes.

45in BW reducer is belong to large dimension butt welded fittings,STD is a commonly used wall thickness for BW fittings.Other commonly used wall thicknesses for BW fittings are SCH 40,SCH 80.

he pipes cannot appreciate because of what the external arrangement of the pipe reducer seems but the flow of the pipe is changed by the internal width conical transition arrangement.

Carbon BW tee is wide used in many applications because welded connection can provide permanent connection.Schedule XS is wall thickness of this tee in the picture.In addition,the commonly used wall thicknesses:SCH40, SCH80.

A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Elbow connectors can link pipes to avoid water leakage and air leakage between pipes.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee, both are used to divide the pipelines to adjust the flow rate and change the direction.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

DN900 LR elbow is large dimension fitting,for the large dimension,the elbows always be butt welded.Wall thickness STD is a commonly used thickness of BW fittings,the other commonly used wall thickness are SCH 40, SCH 80.

S31803 90 degree elbow is a kind of stainless steel with two-phase structure of ferrite and austenite. It combines the high strength of ferritic stainless steel with the good toughness and corrosion resistance of austenitic stainless steel.

SS 304/304L elbow is stainless steel pipe fitting.304/604L is the most commonly used grade of stainless steel in American Standard.Elbows can made as 90 deg and 45 deg.Among these,90 degree elbows can be LR and SR while 45 degree elbows only have LR type.

Concentric reducer is used to join pipe sections or tube sections on the same axis The length dimension of the reducer is almost equal to the average of the big bore and smaller bore pipe diameters.