Equal Tee Schedule 40

90 degree elbow, also called “90 bends or 90 elbows”, are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows.

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on.
In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

Steel pipe elbow is a key part in a pressure piping system used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of 45 degree or 90 degree. This change in fluid flow direction adds pressure losses to the system due to impact, friction and re-acceleration.

Pipe tee is a commonly used pipe fittng used to branch the flow in piping systems.There are two types of tees:Equal Tees and Reducing Tees.SCH XS is a wall thickness of butt welded fittings,SCH XS is large wall thickness which can resists higher perssure.The most used wall thicknesses are SCH 40 and SCH 80.

Carbon steel tee is a commonly used tpye of tees.This is butt welded (BW) carbon steel tee in the picture.it can welded with pipes to achieve permanent connection.Equal tee only can change the direction of the pipes while reducing tee can also reduce the flow of the fluids or gas.

SS 304/304L elbow is stainless steel pipe fitting.304/604L is the most commonly used grade of stainless steel in American Standard.Elbows can made as 90 deg and 45 deg.Among these,90 degree elbows can be LR and SR while 45 degree elbows only have LR type.

Reducing tee is used to change the direction and reduce the flow of the fluids or gas.Butt welded pipe fittings can weld with the pipes so that can anti leakage effectively.Tees have two types:Equal Tee and Reducing Tee.The commonly used wall thicknesses for butt welded fittings are SCH STD,SCH 80,SCH 160.

BW tees and elbows are both commonly used pipe fittings used to transport flow in piping system.Stainless steel pipe fittings re popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter. Therefore, this kind of steel elbow is often used when space is not enough.A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

What is a CAP nipple and what about its specification and advantages.

Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree.

BW elbows are belong to butt welded fittings,wall thickness of BW fittings decided the pressure that the fittings can resistance.Wall thickness SCH 40 is a commonly used wall thickness in butt welded fittings.

BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.There are the applications for eccentric reducer.

Steel pipe tee is a pipe fitting used to tansport the flow in the piping system.Carbon steel fittings are used in many applications becasue of its great excellent functions.

Stainless 316L tee is a stainless steel pipe fitting used to change the direction of the fluids or gas and branch the pipe system.Tees can be equal tees and reducing tees for different usages.Stainless steel fittings are be chosen by the long using years.Beacuse of the high corrosion resistance,stainless steel can be used over 50 years.

Butt welded fittings,can be abridged as BW fittings.Butt welded means the pipe fittings used welded connection to connect with pipes.BW fittings including Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End.Carbon steel always be the material of these fittings as carbon steel has great functions and affordable price.

If the radius is the same as pipe diameter (Center-to-Face dimension of 1.0 X diameter ), it called Short Radius Elbow (SR elbow) used normally for low pressure and low speed pipelines or in tight areas where clearance is the main issue. If the radius is larger than pipe diameter (Center-to-Face dimension of 1.5 X diameter) then we call it a Long Radius Elbow (LR Elbow) used for high pressure and high flow rate pipelines.

Connect two pipes with the same or different nominal diameters to make the pipeline turn at 90 degrees, 45 degrees, 180 degrees and other angles

Steel pipe elbow is an important parts in plumbing pipeline systems and used to change the fluid directions. It ranges in different types as per body material there are stainless steel elbow, carbon steel elbow, and alloy steel;

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

Pipe elbows have three types:THD (threaded),SW (socket weld),BW (butt welded).These elbows used different connections to connect with the pipes in piping system.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel fittings can used over 50 years.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

45 deg elbow has three types:BW,SW,THD.Among these,The commonly used elbows can be 45 deg and 90 deg.BW (butt welded) 90 degree elbows have LR (long radius) and SR (short radius) while 45 degree elbows only have LR type.

What is the use of Weldolet?

45° Pipe Elbow is also known as “45 bends or 45 ells”. The 45° pipe elbow is used to connect tubes at a 45° pipe angle. As the name suggests, this is a pipe fitting device which is bent in such a way to produce 45° change in the direction of flow of the fluid/gas in the pipe.

These Stainless Steel Pipe Fittings are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

The function of an elbow and What is the difference between LR and SR elbow?