Elbow Pipe Fitting ASME B16.9 Pipe Fittings

90 deg elbow is the most used degree in elbows,.Butt welded fittings including BW elbows which used welded connection to connect with pipes.There is also 45 degree elbows.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

Concentric reducer is used to join pipe sections or tube sections on the same axis The length dimension of the reducer is almost equal to the average of the big bore and smaller bore pipe diameters.

DN900 LR elbow is large dimension fitting,for the large dimension,the elbows always be butt welded.Wall thickness STD is a commonly used thickness of BW fittings,the other commonly used wall thickness are SCH 40, SCH 80.

45 degree elbow produces less friction, and with the lower pressure. 45 degree elbow is widely used in chemical industry, food, water supply facilities, electronic industry, chemical pipeline, horticulture, agricultural production, solar equipment pipeline, air conditioning pipeline and other fields.

Connect two pipes with the same or different nominal diameters to make the pipeline turn at 90 degrees, 45 degrees, 180 degrees and other angles

Steel pipe elbows have seamless and welded version, normally in 90 degree, 45 degree & 180 degree. Material are carbon steel, alloy steel & stainless steel. BW 90 degree elbow is formed by hot forming and connects steel pipes or other pipe fittings through butt welding process

Elbow is divided into carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon, PPC, etc. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

SR (short radius) elbow is only for 90 deg elbow.SCH XXS is the biggest wall thickness in butt welded fittings.The commonly used wall thicknesses:SCH 40 , SCH 80.The wall thickness more bigger,the bearded pressure of the fittings can be higher.

ASME B16.9 BW 90 elbow is pipe fitting manufactured according to American Standard.ASME B16.9 is American Standard of butt welded fittings.There is BW elbow in the picture,you could find the specification and dimensions below.

Reducing tee is a commonly used fittings to branch the pipes and reduce the flow in the piping systems.Large dimension is for butt welded fittings.ASME B16.9 pipe fittings are BW fittings according to American Standard,the size range for the ASME B16.9 fittings is 1/2″-80″.

Pipe Elbow is installed between two long pipes for changing the direction of the flow of liquid or fluid. These are commonly available in two types; 90 degrees and 45 degrees. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

Butt Welding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS
China Standard: GB/T12459, GB/T13401, HG/T21635/21631, SH3408/3409
America Standard: ANSI / ASME B16.9 / MSS SP 43
japan Standard: JIS B2311/2312/2313
Europe Standard: EN10253

There are two types of 90 deg elbows:LR (long radius),SR (short radius).45 deg eblows are also have wide applications,be attention,45 deg elbow only have LR type.Butt welded pipe fittings have the most large used range as it can be 1/2″ – 80″.

Steel pipe tee has three types: BW (butt welded),SW (socket welded),THD (threaded).The branches can be equal and reducing.Shanghai Zhucheng is a superior pipe fittings supplier who provide high quality pipe fittings and forged flanges in years.

It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

Carbon steel elbows are curved connecting pieces that join straight lengths of pipe, commonly at a 90° or 45° angle, allowing obstructions to be avoided in plumbing, ventilation, welding, and automotive applications.

A Reducing Tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes. In this, the branch port size is smaller than the other ports of the run.

Carbon BW tee is wide used in many applications because welded connection can provide permanent connection.Schedule XS is wall thickness of this tee in the picture.In addition,the commonly used wall thicknesses:SCH40, SCH80.

BW 90 degree elbow is the most commonly used type of elbows.There is also 45 deg elbow.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.You could find the steel pipe elbow specifications in the connent below.

Butt Weld Fittings include elbows, tees, cross, caps and reduces. These fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule. Buttweld fittings are manufacture by seamless or welded pipe and are formed to get the shape of elbows, tees and cross etc.

Lap joint stub end is belong to butt welded fittings,lap joint stub end is not usually used in many time.Lap joint stub end always be used with lap joint flange.Stainless steel pipe fittings are popular because stainless steel’s excellent performance in corrosion resistance.

ASTM A182 F316 is a popular grade for stainless steel in American Standard.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Carbon steel tee is a commonly used tpye of tees.This is butt welded (BW) carbon steel tee in the picture.it can welded with pipes to achieve permanent connection.Equal tee only can change the direction of the pipes while reducing tee can also reduce the flow of the fluids or gas.

45 deg elbow is a type of elbows,there are also 90 deg elbows and 180 deg elbows.These elbows have similar functions,the main difference is the degree.Elbows can be BW,SW and THD to chosen for different applications.Shanghai Zhucheng is a quality pipe fittings supplier from China.

Concentric reducer’s dimnesions and its usage and advantage

BW tees and elbows are both commonly used pipe fittings used to transport flow in piping system.Stainless steel pipe fittings re popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

BW elbows are belong to butt welded fittings,wall thickness of BW fittings decided the pressure that the fittings can resistance.Wall thickness SCH 40 is a commonly used wall thickness in butt welded fittings.