DN900 LR Elbow Wall Thickness STD

45 deg BW elbow can change the direction of fluids or gas by 45 deg,it only has LR (long radius) type while 90 deg butt welded elbow has both LR and SR(short radius) types.Carbon steel is the most used material in pipe fittings because it has great functions to satisfy many applications.

Concentric reducer’s dimnesions and its usage and advantage

The long radius is used most commonly, and it is also the default radius. When it is the place with the high pressure or the high flow rate, the long radius elbow is usually used. If the resistance requirements of the solid transmission pipeline are strict, the larger radius elbows will be used.

Fittings that change direction in a piping system are called elbows which available in 90 degree and 45 degree long radius elbow. Both of them has the center line at 1.5 x NPS from elbow end.

Steel pipe bend is belong to butt welded fittings.The bend radius R should greater than or equal to 3 times of the outside diameter.Bends could manufacture as the customize degree to meet the client’s demends.

BW Elbow Fittings can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc,

90 deg elbow is always used in piping systems.The other degree of elbows is 45 deg elbow.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.A403 WP316L is a grade for stainless steel in American Standard.

BW equal tees are the most used tees in the all types of tees.There are equal tee and reducing tee.Galvanized carbon steel pipe fittings have better corrosion resistance than carbon steel fittings.

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing. It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.

90 deg LR (long radius) elbow is the most used type of BW elbows.Butt welded elbows also have SR (short radius) elbows.Shanghai Zhucheng has experienced pipe fittings factory that can supply high quality goods for many years.

Lateral tee is a special type of BW tees,it can branch the fluids or gas in 45 deg.Galvanized steel pipe fittings has better anti-corrosive function than normal carbon steel fittings.Galvanized Steel Pipe Fittings have similar corrosion resistance as stainless steel fittings,but more cheaper than stainless steel pipe fittings.

What is the use of Weldolet?

BW Reducing tee is one type of pipe tees,the other type is equal tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.Carbon steel fittings are used in many applications because of its great excellent functions.

BW 90 degree elbow is the most used elbow in all types of elbows.BW fittings are popular because it can achieve strong and permanent connection.Stainless pipe fittings are famous for the excellent anti-corrosive function.Shanghai Zhucheng can supply many kinds of pipe fittings made from stainless steel.

The stub end is usually a short section of pipe fittings, with one end being a flap structure, and the other end can be a stub end or special processing according to specific needs. The turning part is designed to facilitate the connection with other pipe fittings or equipment.

There are two types of 90 deg elbows:LR (long radius),SR (short radius).45 deg eblows are also have wide applications,be attention,45 deg elbow only have LR type.Butt welded pipe fittings have the most large used range as it can be 1/2″ – 80″.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

A Reducing Tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes. In this, the branch port size is smaller than the other ports of the run.

Steel pipe bend is belong to butt welded fittings,bends have some similar usages as elbows.However,bends can be customized by clients to satisfy different demands.API 5L B is a grade of carbon steel material for pipes and bends.

Concentric reducer’s dimnesions and its usage and advantage

Large Size 90 Degree Elbow have an improtant use in piping system to transport flow.Carbon steel elbow is the most used material because of the great functions and affordable price.

BW tees and reducers are the most used pipe fittings in the piping system.Tees can branch the flow in piping systems.Carbon steel pipe fittings are popular as the great functions and affordable functions.

This kind of elbow is classified by angle, and 45 degree elbow and 180 elbow is also very popular. And steel pipe elbow is also available in 60 degree, 30 degree and other special angle according to practical needs.

The connection methods of elbow and pipe include: direct welding (the most common method), flange connection, hot melt connection, electric fusion connection, thread connection and socket connection

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Specificationo and usage of a 90degree BW elbow.

The function of an end cap is to block off the end of a line a piping system, This is achieved by placing the end cap over the open line and welding around the point.

Equal BW tee is a commonly used fittings in butt welded fittings.ASTM A234 WPB WPC are both grades for carbon steel fittings.Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.