Concentric Reducer Carbon Steel Fittings

What is a pipe Tee,its specification and importance.

BW reducer and elbow both commonly used pipe fittings used welding type to connect with pipes and transport flow in piping system.ASME B16.9 fittings are butt welded fittings according to American Standard.

A234 WPB Carbon Steel Buttweld 90 Deg Elbow’s usage

Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

Branches of tees have two types:Equal tee and Reducing tee.These two types tees have same functions,but reducing tee has one more function:it can reduce the flow of the gas or fluids.Butt welded fittings are the most used fittings in many applications because the size range of the BW fittings is big.

It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter.

If the radius is the same as pipe diameter (Center-to-Face dimension of 1.0 X diameter ), it called Short Radius Elbow (SR elbow) used normally for low pressure and low speed pipelines or in tight areas where clearance is the main issue. If the radius is larger than pipe diameter (Center-to-Face dimension of 1.5 X diameter) then we call it a Long Radius Elbow (LR Elbow) used for high pressure and high flow rate pipelines.

45 degree elbow is second common use after 90 degree elbow. The function of a 45 degree elbow is the same as a 90 degree elbow, but the measurement of dimensions is different to that of the 90 degree elbow.

BW Elbow Fittings can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc,

2”90°stainless steel elbow is a commonly used pipe fitting in the pipeline system. It is mainly used to change the direction of the pipeline, make the pipeline turn 90°, and connect two pipes with the same or different nominal diameters.

Concentric reducer is used to join pipe sections or tube sections on the same axis. It is cone-shaped, and is used when there is a shift in diameter between pipes. A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.

What is a CONCENTRIC REDUCER and what about its specification and advantages.

Carbon steel butt weld reducer is belong to ASME B16.9 pipe fittings,there are concentric reducer and eccentric reducer for chosen to meet different demands.

Pipe elbows have three types:THD (threaded),SW (socket weld),BW (butt welded).These elbows used different connections to connect with the pipes in piping system.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel fittings can used over 50 years.

Steel pipe bend is belong to butt welded fittings,bends have some similar usages as elbows.However,bends can be customized by clients to satisfy different demands.Schedule 80 is represents to the wall thickness of BW fittings.The most used wall thicknesses of butt welded fittings are SCH 40,SCH 80.

It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter. Therefore, this kind of steel elbow is often used when space is not enough.A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

90 degree steel pipe elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. It is the common degree in all the pipeline systems and used most in all different degree of elbows

Butt Weld Concertric Reducer is the type of pipe fitting which helps to join two pipes with different diameters. There are various material for The pipe reducers as per the demands of industries and also available in many dimensions.

Butt Weld Fittings include elbows, tees, cross, caps and reduces. These fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule. Buttweld fittings are manufacture by seamless or welded pipe and are formed to get the shape of elbows, tees and cross etc.

12in concentric reducer is a normal size pipe fitting that can used for many applications.SCH 80 is a commonly used wall thickness for BW fittings.There are two types of reducer:concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

45 deg elbow can change the direction of fluids or gas in 45 degree.There is also has 90 deg elbow to be chosen.45 degree elbow has many diffences with 90 degree elbow.All types of elbows can be Equal Tee and Reducing Tee to satisfy different demands.

ASME B 16.9 tee is BW (butt welded) tee belong to butt welded fittings.These tees can bu equal type or reducing type.Normal tees can change the direction of the pipe system of 90 deg.And tees also have lateral tees to change the direction of 45 deg.

Butt Welding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS
China Standard: GB/T12459, GB/T13401, HG/T21635/21631, SH3408/3409
America Standard: ANSI / ASME B16.9 / MSS SP 43
japan Standard: JIS B2311/2312/2313
Europe Standard: EN10253

What is Galvanizing?

Galvanizing, or galvanization, is a manufacturing process where a coating of zinc is applied to steel or iron to offer protection and prevent rusting. There are several galvanizing processes available, but the most commonly offered and used method is called hot-dip galvanizing.

BW equal tees are the most used tees in the all types of tees.There are equal tee and reducing tee.Galvanized carbon steel pipe fittings have better corrosion resistance than carbon steel fittings.

The pipes cannot appreciate because of what the external arrangement of the pipe reducer seems but the flow of the pipe is changed by the internal width conical transition arrangement.