Concentric Reducer BW Pipe Fittings

45 ° elbow is also called “45 elbow or 45 ell”, and its bending mode can change the flow direction of fluid / gas in the pipeline by 45 °. The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

Large diameter equal tee is belong to butt welded fittings because BW fittings size range is 1/2″-80″ while the forged fittings only have 1/8″-4″.Carbon steel fittings are used in many applications because of its great excellent functions.

Butt weld fittings are manufacture by seamless or welded pipe. For pipe fittings manufacturers, the forming process of welded pipe and seamless pipe is basically same. Butt welded fittings can be divided into carbon steel butt welded fittings and stainless-steel butt-welded fittings

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories.

Concentric reducer’s dimnesions and its usage and advantage

Elbow is a commonly used connecting pipe fitting in plumbing installation, which is used for connecting pipe bends

What is a pipe bend,what about its specification and its difference between a elbow

Butt welded cap is a pipe fitting used to closed the piping systems.BW caps use welding connection to connect with the pipes.SCH 80 is a commonly used wall thickness of BW fittings,the other commonly used wall thickness is SCH 40.

It can have concentric reducer and eccentric reducer. It is widely used in pipeline installation projects, such as when the diameter of the pipeline needs to be changed at the inlet and outlet of the pump

S31254 Elbow is a pipe fitting used in pipeline systems, and its main function is to change the flow direction of the fluid in the pipeline. Common bending angles are 45°, 90° and 180°, etc.

When short radius elbows are used, the maximum working pressure should not exceed 0.8 times of long radius elbows of the same specification Miter elbows are usually used for large-size pipes with moderate conditions in low pressure (design pressure s2.0mpa), water and similar fluid media

Buttwelding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS

Butt weld elbow is a steel elbow formed by hot pressing or forging. Its connection form is to directly weld the elbow and steel pipe. Butt welded elbows have beveled ends to allow for ease of welding. This bevel allows for full penetration weld in most of the cases. Butt welded elbows are mainly used for elbow with higher pressure and temperature.

BW reducers have two types:Concentric Reducer and Eccentric Reducer.These two types can meet different demand.This is stainless steel BW COC reducer in the picture.Stainlee steel is better in corrosion resistance,so the used years will be longer than other matercial.

Steel pipe elbows have seamless and welded version, normally in 90 degree, 45 degree & 180 degree. Material are carbon steel, alloy steel & stainless steel. BW 90 degree elbow is formed by hot forming and connects steel pipes or other pipe fittings through butt welding process

Carbon steel butt weld reducer is belong to ASME B16.9 pipe fittings,there are concentric reducer and eccentric reducer for chosen to meet different demands.

Carbon steel elbow dimensions are different depend on the type of the elbow.BW elbows can be 1/2″-80″;SW elbow and THD elbow can be 1/8″-4″.Elbows can be made from carbon steel,alloy steel and stainless steel.Shanghai Zhucheng is an experienced pipe fittings manufacturer for many years.

Steel pipe elbow is a key part in a pressure piping system used to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe and thus the fluid direction turn to a certain direction of 45 degree or 90 degree. This change in fluid flow direction adds pressure losses to the system due to impact, friction and re-acceleration.

ASME B16.9 BW 90 elbow is pipe fitting manufactured according to American Standard.ASME B16.9 is American Standard of butt welded fittings.There is BW elbow in the picture,you could find the specification and dimensions below.

Butt welded lateral tee is a special type of BW tees.It is different from the normal tees as the lateral tee can change the direction of the pipe system in 45 degree.Carbon steel fittings are the most used fittings as carbon steel material has great functions and affordable price.

Concentric reducers are beneficial to use where different ratings and to wear protection is required in conveying between flanges or pipes. nd the pipe is connected through conical transition section on the same axis.

Carbon BW tee is wide used in many applications because welded connection can provide permanent connection.Schedule XS is wall thickness of this tee in the picture.In addition,the commonly used wall thicknesses:SCH40, SCH80.

5in SW elbow is used to socketed with pipes and then welded on pipes.ASME B16.11 pipe fittings mean forged pipe fittings.Forged pipe fittings can be divided in socket weld fittings and threaded fittings.

Butt weld fittings would also be referred to as welded pipe fittings. When these would be used in stainless steel and carbon steel, they would be able to offer certain advantages as compared to socket weld and threaded fittings. Whereas socket weld would only be available up to a specific size, you would find butt weld fittings to be available in sizes starting 1/2 inch to 72 inch.

Steel pipe elbow is a key parts in a piping system for to change the fluid flow direction. It is used to connect two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree or 90 degree.

ASTM A234 WPB Eccentric Reducers are pipe fittings used to connect two pipes of different diameters, with the centerline of one pipe being offset from the other.