Carbon Steel Reducer Steel Pipe Fittings Supplier

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Concentric reducers are easy to transport mud and grinding fluid and are suitable for corrosive operations , It will change kindly between the pump and piping.

90 degree steel pipe elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

DN1200 BW elbow is belong to large dimension fittings,these fittings always be butt welded fittings because of the large size.Butt welded fittings used welded type to connect with the pipes to achieve strong and permanent connection.

Concentric reducer is used to join pipe sections or tube sections on the same axis The length dimension of the reducer is almost equal to the average of the big bore and smaller bore pipe diameters.

An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.

ASTM A234 WPB butt weld cap is a pipe fitting end cap that is weldable, belongs to grade B and is pressure capable. The 234 stands for seamless steel standard for pipe fittings. A234 WPB Caps can be used in a variety of applications and industries. The A234 WPB Cap is used to secure an end line of a piping and seal it water tight.

Pipe tee is a commonly used pipe fittng used to branch the flow in piping systems.There are two types of tees:Equal Tees and Reducing Tees.SCH XS is a wall thickness of butt welded fittings,SCH XS is large wall thickness which can resists higher perssure.The most used wall thicknesses are SCH 40 and SCH 80.

Butt Welding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS
China Standard: GB/T12459, GB/T13401, HG/T21635/21631, SH3408/3409
America Standard: ANSI / ASME B16.9 / MSS SP 43
japan Standard: JIS B2311/2312/2313
Europe Standard: EN10253

It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter. Therefore, this kind of steel elbow is often used when space is not enough.A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

Carbon steel butt welded 90° elbows are belong to ASTM A234 WPB pipe fittingsBW 90 deg elbows could be made in two types:LR (Long Radius) and SR (Short Radius).The angle of pipe elbows are 45deg and 90 deg.Only 90 deg elbows have LR.

ASME B16.9 Stainless Steel Butt Weld Cross Fittings The function of a cross is similar to that of a tee by means of the exception of providing two 90 Deg outlets opposite each other.

Butt welded elbow,also called BW elbow,there are two types elbows:Reducing Elbow and Equal Elbow.both types elbows can change the fluids or gas in 45 deg or 90 deg,while reducing elbows also can reduce the flow in the piping system.Shanghai Zhucheng has experienced steel pipe fittings factory to supply high quality fittings.

2”90°stainless steel elbow is a commonly used pipe fitting in the pipeline system. It is mainly used to change the direction of the pipeline, make the pipeline turn 90°, and connect two pipes with the same or different nominal diameters.

Butt Weld Concertric Reducer is the type of pipe fitting which helps to join two pipes with different diameters. There are various material for The pipe reducers as per the demands of industries and also available in many dimensions.

BW 90 elbow is the most used degree,there is also 45 deg elbow to choose.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.ASME B16.9 is American Standard of butt welded fittings.

Steel Reducing Tee: The branch diameter is smaller than the main line diameter. Tee reducer is usually described as NPS diameters in 4”x 4”x 3”, 4”is the main line pipe diameter, and 3”is the reducing branch

What is a latera tee and the difference between a wye and a lateral?

90 deg elbow is always used in piping systems.The other degree of elbows is 45 deg elbow.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.A403 WP316L is a grade for stainless steel in American Standard.

Steel pipe bend is belong to butt welded fittings,bends have some similar usages as elbows.However,bends can be customized by clients to satisfy different demands.API 5L B is a grade of carbon steel material for pipes and bends.

BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.There are the applications for eccentric reducer.

Welded steel pipes are popular because of the strong and permanent connection,the ends of the pipes can welded with flanges.Slip on (SO) flange can slip on the pipe,and then welded on the pipes.

Elbow is divided into carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon, PPC, etc. Its function is to change the direction of the fluid by 90 degrees, so it is also called vertical elbow.

Large diameter equal tee is belong to butt welded fittings because BW fittings size range is 1/2″-80″ while the forged fittings only have 1/8″-4″.Carbon steel fittings are used in many applications because of its great excellent functions.

A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Elbow connectors can link pipes to avoid water leakage and air leakage between pipes.

45 ° elbow is also called “45 elbow or 45 ell”, and its bending mode can change the flow direction of fluid / gas in the pipeline by 45 °. The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

A234 WPB BW tee is a commonly used pipe fitting to transport flow in piping system.There are two tpyes of tees:Equal Tee and Reducing Tee.SCH 80 is a commonly used wall thickness for butt welded fittings,the other commonly used wall thickness is SCH 40.

45 deg elbow has three types:BW,SW,THD.Among these,The commonly used elbows can be 45 deg and 90 deg.BW (butt welded) 90 degree elbows have LR (long radius) and SR (short radius) while 45 degree elbows only have LR type.