Carbon Steel ASTM A105N Forged Steel Flanges BLIND FLANGE Manufacturer ASME B16.5

A105 FF slip on flange is a commonly used pipeline connection element, mainly made of carbon steel, and connected to pipelines or other flanges by flat welding. The structure of the slip on flange is relatively simple.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

A flange can be defined as a method that helps in connecting pipes, valves, etc., to form a full piping system. There are six flange classes ranging from #150 to #2500. Governed by B 16.5 standards, the ASME B16. 5 Class 300 Flange provides a pressure capacity of 300Lb.

What is a WN Flange?and what about its specification

The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange. The bore of the slip on will give ample amount of space for the matching pipe.

What is a SW flange and what about its specification.

The common material grade of stainless steel ASTM A182 contains F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.

DN150 SW flange is a 6in flange used to socketed with the pipes and then welding on pipes.CL150 forged flange is the lowest pressure flange.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

Weld Neck Flanges are a very common type of pipe flanges used in various industrial applications. They have a long tapered hub and are often used for high pressure applications.

An assembly with limited space may be an instance in which a socket weld is selected, provided the pressure class is comparatively low and the fluid is not corrosive or for extremely high temperature service.

Common material grade for stainless steel flange: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317,347,904L， 1.4404, 1.4437.

1500 LB SO flanges are belong to high pressure flanges.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.Flange dimension has a very large range to meet different demands.

The connection method of A182 F11 socket flange is to insert the pipe into the socket of the flange, and then seal it with welding or use a sealing gasket. This connection method is relatively strong and can adapt to the thermal expansion and contraction of the pipe to a certain extent.

Slip on flange is also called SO flange.This flange can slip onto the pipes and welded with the pipes.Shanghai Zhucheng is a forged flanges supplier who supply high quality flanges for years.

flange type: Weld Neck Flange ( WN),Slip-on Flange (SO), Threaded Flange (THD),Socket Weld Flange (SW),Blind Flange (BL),Lap Joint Flange (LAPJ),Plate flange (PL)

Forged Steel Flanges Specification
Shape: Weld Neck Flange ( WN),Slip-on Flange (SO), Threaded Flange (THD),Socket Weld Flange (SW),Blind Flange (BL),Lap Joint Flange (LAPJ),Plate flange (PL)
Size Range: 1/2″ – 48″/ DN15 – DN1200
Pressure Rating: Class 150, 300, 600, 900, 1500, 2500lb
Standard: ASME B16.5, ASME B16.47 Series A/B, EN 1092-1, API 605, MSS SP-44, DIN 2627, DIN 2527, DIN 2558, DIN 2576, DIN 2641, DIN 2655, DIN 2656, DIN2573
Carbon Steel: ASTM A105 / A105N, ASTM A350 LF2/LF3, ASTM A694 F42 / 46 / 56 / 60 / 65, P235GH, P265GH, P280GH, P355GH

Socket Weld Flange contain a shoulder on the flange inside that acts as a guide to set the depth at which the pipe is welded to the flange.

The specification of ASTM A182 Forged Pipe Fittings includes forged fittings, stainless steel, rolled alloy, forged alloy, pipe flanges as well as high-temperature service. Later then forgings and hot working, it would be cooled down to a certain temperature before heat treatment.
The Alloy Steel A182 Threaded Elbow material grade contains ASTM A182 F11 / 12 / 5 / 9 / 91 / 92 / 22.

It is used to insert the pipe into the inner hole of flange, as the flange inner diameter is little bigger than the pipe’s outer diameter, pipe and flange could be connected by lap welding at the top and bottom of the flange. The slip-on flange is a simple and excellent alternative to a weld neck as it does not have a weld bevel, and therefore allows the pipe to be adjusted in length relative to its position of the flange.

What is a weld neck flange and its specification?

TOE means threaded at one end when translated. Thus, we can say that a nipple TOE is a nipple that has one threaded end.
In this case, we have the acronym TBE for “threaded both ends” which means threaded at both ends. In other words, this is the most typical type of nipple as described above for connecting two parts or fittings with female threading.

Alloy Steel: ASTM A182 F11 / 12 / 5 / 9 / 91 / 92
Stainless Steel: ASTM A182 F304/304L/304H, 316/316L, 321, 310S, 317,347,904L, 1.4404, 1.4437.

900LB slip on flange can slip on the pipes and welded with the pipes.Stainless steel flanges are popular because of the an-ti corrosive function.Stainless steel flange can used over 50 years.Flanges have many pressures:CL150, CL300, CL600, CL900, CL1500, CL2500.

What is a Blind Flange,what about its specification and its advantages

Classification of weld neck flange