BW Elbow Coated Pipes And Fittings

Stainless elbow is a popular used type of elbow becase the stainless steel has excellent an-ti corrosive function.Shanghai Zhucheng is an excellent butt welded fittings factory who supplys high quality pipe fittings and flanges for years.

These Stainless Steel Pipe Fittings are best known for their heat resistance, creep strength and tensile strength. Machined and fabricated to meet your diverse piping requirements, these pipes fittings exhibit excellent corrosion resistance in a wide range of atmospheric environments.

90 degree elbow, also called “90 bends or 90 elbows”, are manufactured as SR (Short Radius) elbows and LR (Long Radius) elbows.

Butt Weld Fittings include elbows, tees, cross, caps and reduces. These fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule. Buttweld fittings are manufacture by seamless or welded pipe and are formed to get the shape of elbows, tees and cross etc.

Carbon steel elbow dimensions are different depend on the type of the elbow.BW elbows can be 1/2″-80″;SW elbow and THD elbow can be 1/8″-4″.Elbows can be made from carbon steel,alloy steel and stainless steel.Shanghai Zhucheng is an experienced pipe fittings manufacturer for many years.

The elbow radius mean curvature radius. If the radius is the same as pipe diameter, it called short radius elbow, also called SR elbow, normally for low pressure and low speed pipelines. If the radius is larger than pipe diameter, R ≥ 1.5 Diameter, then we call it a long radius elbow (LR Elbow), applied for high pressure and high flow rate pipelines.

Concentric reducers are easy to transport mud and grinding fluid and are suitable for corrosive operations , It will change kindly between the pump and piping.

2”90°stainless steel elbow is a commonly used pipe fitting in the pipeline system. It is mainly used to change the direction of the pipeline, make the pipeline turn 90°, and connect two pipes with the same or different nominal diameters.

ASME B16.9 Stainless Steel Butt Weld Cross Fittings The function of a cross is similar to that of a tee by means of the exception of providing two 90 Deg outlets opposite each other.

45 ° elbow is also called “45 elbow or 45 ell”, and its bending mode can change the flow direction of fluid / gas in the pipeline by 45 °. The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

Concentric reducers will change kindly between the pump and piping， A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.

What is a CAP nipple and what about its specification and advantages.

A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

There are two types of 90 deg elbows:LR (long radius),SR (short radius).45 deg eblows are also have wide applications,be attention,45 deg elbow only have LR type.Butt welded pipe fittings have the most large used range as it can be 1/2″ – 80″.

ASTM A182 F304 pipe fittings are inculding many fittings,among these,stainless butt welded elbows are the most common used fittings.For 90 deg elbows,there are two types :LR (Long Radius) and SR (Short Radius).Stainless steel pipe fittings are popular because of the superior functions.

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories.

Carbon steel elbows are the most commonly used elbows in all the types and material elbows.Large dimensions elbow is butt welded fitting,you can find the butt welded fittings specification below.

Concentric reducer’s dimnesions and its usage and advantage

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

BW tee is a commonly used fittings in BW fittings.Tees can also be threaded (THD) and socket welded (SW) tees to used in many different applications.Shanghai Zhuangcheng is an excellent pipe fittings manufacturer who can supply high quality pipe fittings in China.

45 deg elbow has three types:BW,SW,THD.Among these,The commonly used elbows can be 45 deg and 90 deg.BW (butt welded) 90 degree elbows have LR (long radius) and SR (short radius) while 45 degree elbows only have LR type.

classification,dimension of lateral tee,and its difference from a WYE.

What is a Concentric Reducer,what about its specification and advantages.

Large Size 90 Degree Elbow have an improtant use in piping system to transport flow.Carbon steel elbow is the most used material because of the great functions and affordable price.

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing. It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.

BW elbows are belong to butt welded fittings,wall thickness of BW fittings decided the pressure that the fittings can resistance.Wall thickness SCH 40 is a commonly used wall thickness in butt welded fittings.

Difference between a pipe elbow and a pipe bend is as follows:

Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D. Most elbows are available in short radius or long radius variants. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.