BW Cap A234 WPB – SCH 40S

45 deg elbow can change the direction of fluids or gas in 45 degree.There is also has 90 deg elbow to be chosen.45 degree elbow has many diffences with 90 degree elbow.All types of elbows can be Equal Tee and Reducing Tee to satisfy different demands.

A Reducing Tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes. In this, the branch port size is smaller than the other ports of the run.

These types of tube fittings like male elbows and female elbows have been specifically designed for use on instrumentation, process and control systems and equipment employed in chemical, petroleum, fluid power, electronic and pulp and paper plants.

BW Reducing tee is one type of pipe tees,the other type is equal tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.Carbon steel fittings are used in many applications because of its great excellent functions.

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on.
In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

Welded steel pipe is a type of steel pipes,the other type is seamless steel pipe (SMLS).Welded steel pipes also can divided into ERW,SSAW,LASW,DSAW.

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing, It helps to change direction at 90 degree.

When the direction change angle of the single section of the miter elbow is greater than 45, it should not be used in the pipeline with toxic and combustible media, or in the pipeline subject to vibration, pressure pulsation and alternating load due to temperature change

A equal tee’s usage,dimension and features.

Equal diameter tee, also known as straight tee, the branch diameter of the tee is the same as the pipe diameter of the tee. The three branches of tee have same diameters.

Fittings that change direction in a piping system are called elbows which available in 90 degree and 45 degree long radius elbow. Both of them has the center line at 1.5 x NPS from elbow end.

90 degree elbow’s usage and its specification

Branches of tees have two types:Equal tee and Reducing tee.These two types tees have same functions,but reducing tee has one more function:it can reduce the flow of the gas or fluids.Butt welded fittings are the most used fittings in many applications because the size range of the BW fittings is big.

Carbon Steel: Q235, 20#, 35#, 45#, 20G,ASTM A234 WPB/WPC
Low Temp Carbon Steel: Q345B, 16Mn, ASTM A420 WPL6
Pipeline Steel: ASTM A860 WPHY 42 / 46 / 56 / 60 / 65
Alloy Steel: ASTM A234 WP11 / WP12 / WP 5 / WP9 / WP91 / WP92,15CrMoG, 12Cr1MoVG, 12Cr5Mo, 1Cr5Mo, Cr9Mo, 10CrMo910, 12CrMo4-5
Stainless Steel: ASTM A403 WP304/304L/304H, 316/316L, 310S, 321, 317,347,904L
Duplex Stainless Steel: ASTM A815 S32205, S31803, 32750, 32760

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories. Such fittings are important because they meet two needs, that is, to connect or separate liquid streams. They are widely used in positive and vacuum applications.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.Stainless pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

A234 WPB/WPC BW concentric reducers are carbon steel butt welded fittings,among these,A234 WPB is more chosen in many industries.BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

ASME B16.9 BW reducer used the most used standard for butt welded fittings.arbon steel fittings are used in many applications because of its great excellent functions.BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

90 deg long radius elbow is a commonly used type in elbows.There are aslo 90 degree short radius elbow and 45 degree elbow.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Butt weld elbow is a steel elbow formed by hot pressing or forging. Its connection form is to directly weld the elbow and steel pipe. Butt welded elbows have beveled ends to allow for ease of welding. This bevel allows for full penetration weld in most of the cases. Butt welded elbows are mainly used for elbow with higher pressure and temperature.

90 deg elbow is the most used degree in elbows,.Butt welded fittings including BW elbows which used welded connection to connect with pipes.There is also 45 degree elbows.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

SS 304/304L elbow is stainless steel pipe fitting.304/604L is the most commonly used grade of stainless steel in American Standard.Elbows can made as 90 deg and 45 deg.Among these,90 degree elbows can be LR and SR while 45 degree elbows only have LR type.

BW reducer can be concentric (COC) reducer and eccentric (ECC) reducer.The main difference is the internal structure.COC and ECC types reducers could meet different demands in many applications.You could find the summary “COC VS ECC” in the content below.

Carbon Steel Pipe Fittings Elbow is a most common type of CS fitting used to join pipe or tubing to allow a change of direction, usually a 90° or 45° angle, Elbows ends may be machined for butt welding , threaded , or socketed