BW 90 DEG Elbow Schedule 80

It can have concentric reducer and eccentric reducer. It is widely used in pipeline installation projects, such as when the diameter of the pipeline needs to be changed at the inlet and outlet of the pump

3/4in BW tee is a normally used fitting in butt welded fittings.A403 WP321 is a grade for stainless steel.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Butt welded fittings,can be abridged as BW fittings.Butt welded means the pipe fittings used welded connection to connect with pipes.BW fittings including Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End.Carbon steel always be the material of these fittings as carbon steel has great functions and affordable price.

There are two types of 90 deg elbows:LR (long radius),SR (short radius).45 deg eblows are also have wide applications,be attention,45 deg elbow only have LR type.Butt welded pipe fittings have the most large used range as it can be 1/2″ – 80″.

The function of a 45 Degree Long Radius Elbow is same as 90 degrees long and short elbow, but the measurement and dimensions are different to that of a 90 degree long and the short elbow.

Butt weld fittings are manufacture by seamless or welded pipe. For pipe fittings manufacturers, the forming process of welded pipe and seamless pipe is basically same. Butt welded fittings can be divided into carbon steel butt welded fittings and stainless-steel butt-welded fittings

ASTM A403 Stainless Steel Butt Weld 45 Degree Elbow refers to the material of forged and rolled austenitic stainless fittings for pressure pipes. Common grades are WP304/L, WP316/L. They can be used into many fields as engineering industry, energy conversion plants etc. ASTM A403 WP304, WP316 Elbow are buttweld fittings made for austenitic stainless steel applications with forged material.

BW elbow can welded with pipes to achieve strong and permanent connection.ASTM A234 WPB pipe fittings are the most popular carbon steel fittings.There is also has A234 WPC for carbon steel fittings.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

A equal tee’s usage,dimension and features.

90 degree steel pipe elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

BW elbow types have BW (butt welded),SW (socket weld),THD (threaded).The butt welded elbow is the most used type.Elbows have two shapes:Equal and Reducing.Shanghai Zhucheng is a pipe fittings manufacturer who can supply 45 deg,90 deg and 180 deg elbows.

Classify,specification of a BW 90 degree elbow

Pipe crossing is used where four pipes intersect. The cross pipe may have one inlet and three outlets, or three inlets and one outlet. The diameter of the outlet and inlet can be the same or different.

A Reducing Tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes. In this, the branch port size is smaller than the other ports of the run.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Butt welded elbow is a commonly used pipe fitting,it can divided as two types:90 deg and 45 deg.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.These are Shanghai Zhucheng Pipe Fittings Manufacturing Co Ltd’s steel pipe fittings packages to ensure that the products are not damaged during transportation.

12in concentric reducer is a normal size pipe fitting that can used for many applications.SCH 80 is a commonly used wall thickness for BW fittings.There are two types of reducer:concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

Butt Weld Fittings include elbows, tees, cross, caps and reduces. These fittings are the most common type of welded pipe fitting and are specified by nominal pipe size and pipe schedule. Buttweld fittings are manufacture by seamless or welded pipe and are formed to get the shape of elbows, tees and cross etc.

According to its radius of curvature, it can be divided into long radius elbow and short radius elbow. Long radius elbow means that its radius of curvature is equal to 1.5 times the outer diameter of the pipe, that is, r = 1.5D. Short radius elbow means that its radius of curvature is equal to the outer diameter of the pipe, that is, r = 1.0d.

Butt welded reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.There are the BW fittings specifications in the content below.

According to fluid flow direction of the pipes, elbows can be divided into different degrees, such as 45 degree, 90 degree, 180 degree, which are most common elbows. Also there are 60 degree and 120 degree elbows for some special pipelines. This degree is just an representation of the angle by which the fluid flow is going to change after flowing through the said elbow.

Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee, both are used to divide the pipelines to adjust the flow rate and change the direction.

SS400 90 DEG elbow is used to transport flow in piping system.Butt welded fittings used welded connection to connect with the pipes to achieve the strong and premanent connection.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

A concentric reducer is used to join pipe sections or tube sections on the same axis. The concentric reducer is cone-shaped, and is used when there is a shift in diameter between pipes. For example, when a 1″ pipe transitions into a 3/4″ pipe and the top or bottom of the pipe doesn’t need to remain level.