Butt Weld Tee ANSI ASME B16.9 Pipe Fittings

The pipes cannot appreciate because of what the external arrangement of the pipe reducer seems but the flow of the pipe is changed by the internal width conical transition arrangement. It can be axially shifted and externally reconfigured to offer more efficient reducer connection. Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

Steel pipe tee has two types:Equal Tee and Reducing Tee.Common tees have 90 dergee between the main pipe and the branch.There also has lateral tee which has 45 degree between the main pipe and the branch.

90 degree steel pipe elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

Concentric reducers facilitate the delivery of mud and abrasive fluids and are suitable for corrosive operations and where different ratings and wear protection are required between flanges.

SS 304/316 pipe tees are popular because these tees have excellent corrosion resistance.Tees can made for three types:BW (butt welded) tee,SW (socket weld) tee,THD (threaded) tee.Clients can choose different type of tees to satisfy different demands.ASME B 16.9 is represents butt welded fittings in American Standard.SW fittings and THD fittings are belong to forged fittings which marked as ASME B 16.11.

Carbon steel tee is a commonly used tpye of tees.This is butt welded (BW) carbon steel tee in the picture.it can welded with pipes to achieve permanent connection.Equal tee only can change the direction of the pipes while reducing tee can also reduce the flow of the fluids or gas.

Steel pipe bend is belong to butt welded fittings,bends have some similar usages as elbows.However,bends can be customized by clients to satisfy different demands.

Clean the steel pipe elbow body and wrap the polyethylene tape on it with adhesive. Usually the thickness of coating is 2mm. They are used in the underground pipeline system. Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D.

ASME B16.9 tee is a butt welded tee .ASME B16.9 is American Standard for BW fittings.Carbon steel fittings are always been chosen because of the great functions and affordable price.

The butt welded eccentric reducer is a pipe fitting used to connect pipes of different diameters, and its central axes do not overlap, and there is an eccentricity.

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing. It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.

ASME B16.9 Stainless Steel Butt Weld Cross Fittings The function of a cross is similar to that of a tee by means of the exception of providing two 90 Deg outlets opposite each other.

Butt weld elbow can be welded with the pipes in piping systems to change the direction of the fluids or gas.A860 WPHY60 is belong to pipeline steel material.These elbows can be 90 deg and 45 deg to transport the flow in different direction.

If the radius is the same as pipe diameter (Center-to-Face dimension of 1.0 X diameter ), it called Short Radius Elbow (SR elbow) used normally for low pressure and low speed pipelines or in tight areas where clearance is the main issue. If the radius is larger than pipe diameter (Center-to-Face dimension of 1.5 X diameter) then we call it a Long Radius Elbow (LR Elbow) used for high pressure and high flow rate pipelines.

MSS SP 43 Stainless Steel A403 WP304L Butt Weld Fitting Concentric Reducer,its decription,specfication,material specification and some details when packing.

It is used to handle any high or low weight fluid flow through the tee.Reducing tee is a kind of pipe fitting whose branch size is smaller than the size of pipeline parts. It is used for main pipe string accessories, solvent welding accessories, side outlet and conflicting soluble welding accessories.

Bending radius less than or equal to 1.5 times of pipe diameter belongs to elbow, and bending radius greater than 1.5 times of pipe diameter belongs to elbow

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

Butt welded cross is pipe fitting used to transport the flow in piping systems.BW cross can connect four pipes vertically with welded connection.Cross can be two types:Equal and Reducing.These crosses have similar functions,but reducing tees can reduce the flow while equal tees can not.

90 degree elbow’s usage and its specification

The connection methods of elbow and pipe include: direct welding (the most common method), flange connection, hot melt connection, electric fusion connection, thread connection and socket connection

Elbow could be ranged from direction angle, connection types, length and radius, material types. As we know, according to fluid direction of the pipelines, elbow can be divided into different degrees, such as 45 degree, 90 degree,180 degree, which are most common degrees. Also there has 60 degree and 120 degree, for some special pipelines.

Concentric reducers are tapered and are used when the diameter between pipes changes. It can be axially shifted and externally reconfigured to offer more efficient reducer connection.

Carbon steel butt welding 90 degree elbow is a connector specially designed for use in piping systems. Its main function is to create a 90 degree turn in the pipe so that the fluid can flow along a predetermined path.

Lateral tee is a special type of BW tees,it can branch the fluids or gas in 45 deg.Galvanized steel pipe fittings has better anti-corrosive function than normal carbon steel fittings.Galvanized Steel Pipe Fittings have similar corrosion resistance as stainless steel fittings,but more cheaper than stainless steel pipe fittings.

Buttwelding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS

Large Diameter Concentric Reducer is belong to butt welded fittings because BW fittings size range is 1/2″-80″ while the forged fittings only have 1/8″-4″.ASTM A234 WPB is represents to carbon steel pipe fittings in American Standard.