butt weld steel pipe TEE ASME B16.9 SCH10-160

Carbon Steel: Q235, 20#, 35#, 45#, 20G,ASTM A234 WPB/WPC
Low Temp Carbon Steel: Q345B, 16Mn, ASTM A420 WPL6
Pipeline Steel: ASTM A860 WPHY 42 / 46 / 56 / 60 / 65
Alloy Steel: ASTM A234 WP11 / WP12 / WP 5 / WP9 / WP91 / WP92,15CrMoG, 12Cr1MoVG, 12Cr5Mo, 1Cr5Mo, Cr9Mo, 10CrMo910, 12CrMo4-5
Stainless Steel: ASTM A403 WP304/304L/304H, 316/316L, 310S, 321, 317,347,904L
Duplex Stainless Steel: ASTM A815 S32205, S31803, 32750, 32760

45 degree elbows have same functions to 90 degree elbows,the only different is 45 deg elbow changes the direction of pipes in 45 deg while the 90 deg elbow changes the direction in 90 deg.BW pipe fittings are popular as its strong and permanent connection.

Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.ASME B16.9 is American Standard for butt welded fittings.

Carbon steel elbow has two degrees:90 deg and 45 deg.In real application,90 deg is more used type.90 deg elbow can be long radius (LR) and short radius (SR) while 45 deg elbow only has long radius (LR).

4in BW elbow is a small dimension elbow,4in is a normal size of elbows so that this type can be used in many piping systems.Carbon and alloy steel pipe fittings are usually be chosen as the excellent functions and reasonable price.

Elbow could be ranged from direction angle, connection types, length and radius, material types. As we know, according to fluid direction of the pipelines, elbow can be divided into different degrees, such as 45 degree, 90 degree,180 degree, which are most common degrees. Also there has 60 degree and 120 degree, for some special pipelines.

When short radius elbows are used, the maximum working pressure should not exceed 0.8 times of long radius elbows of the same specification Miter elbows are usually used for large-size pipes with moderate conditions in low pressure (design pressure s2.0mpa), water and similar fluid media

Reducing tee is a commonly used fittings to branch the pipes and reduce the flow in the piping systems.Large dimension is for butt welded fittings.ASME B16.9 pipe fittings are BW fittings according to American Standard,the size range for the ASME B16.9 fittings is 1/2″-80″.

ASTM A234 WPB Eccentric Reducers are pipe fittings used to connect two pipes of different diameters, with the centerline of one pipe being offset from the other.

An equal tee, otherwise called straight tee, means the branch diameter of this tee is same with the main pipe (Run pipe) diameter of this tee.
A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefore, used to connect two pipes of the same nominal diameter.

Steel Pipe Elbow is the most common pipe fitting that changes the direction of the pipeline. It plays a important role in the piping system.

Reducing tee is used to change the direction and reduce the flow of the fluids or gas.Butt welded pipe fittings can weld with the pipes so that can anti leakage effectively.Tees have two types:Equal Tee and Reducing Tee.The commonly used wall thicknesses for butt welded fittings are SCH STD,SCH 80,SCH 160.

A234 WPB/WPC BW concentric reducers are carbon steel butt welded fittings,among these,A234 WPB is more chosen in many industries.BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

Steel pipe bend is belong to butt welded fittings.The bend radius R should greater than or equal to 3 times of the outside diameter.Bends could manufacture as the customize degree to meet the client’s demends.

What is a Concentric Reducer,what about its specification and advantages.

Equal butt weld elbow is used to change the direction of the flow in piping system.SCH 80 is a commonly used wall thickness for butt welded fittings,the other commonly used wall thickness is SCH 40.

Concentric reducers are perfectly suitable to use in the exclusion of the pump. It is cone-shaped, and is used when there is a shift in diameter between pipes. A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.

The butt welded eccentric reducer is a pipe fitting used to connect pipes of different diameters, and its central axes do not overlap, and there is an eccentricity.

Carbon steel reducer is a commonly used BW fitting.Butt welded pipe fittings used welded connection to connect with pipes in piping systems.These BW fittings are popular because of the strong and permanent connection.Carbon steel is the most used material in many applications because of the great functions and affordable price.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

Equal BW tee is a commonly used fittings in butt welded fittings.ASTM A234 WPB WPC are both grades for carbon steel fittings.Pipe tees can be equal tee and reducing tee.These tees have same functions,the only difference is reducing tee can reduce the flow in piping system.

Clean the steel pipe elbow body and wrap the polyethylene tape on it with adhesive. Usually the thickness of coating is 2mm. They are used in the underground pipeline system. Long radius elbow refers to the pipe outer diameter with radius of curvature equal to 1.5 times, i.e R = 1.5D.

90 deg elbow is the most used degree in elbows,.Butt welded fittings including BW elbows which used welded connection to connect with pipes.There is also 45 degree elbows.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

A420 WPL6 concentric reducer is a kind of reducer, which is in the shape of concentric cone structure. It has two ends, one end has a larger diameter and the other end has a smaller diameter, and the central axis of the large and small ends are coincident, that is, concentric.

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

Carbon steel elbows are curved connecting pieces that join straight lengths of pipe, commonly at a 90° or 45° angle, allowing obstructions to be avoided in plumbing, ventilation, welding, and automotive applications.