ASTM A403 316L Stainless Steel CONCENTRIC REDUCER BW B 16.9

A234 WPB BW reducer has the most wide ragnge of applications in all types of butt welded reducer, because A234 WPB is the most used grade in carbon steel.Carbon steel pipe fittings are accepted in many projects because these fittings have great functions and reasonable price.

Butt welded elbow,also called BW elbow,there are two types elbows:Reducing Elbow and Equal Elbow.both types elbows can change the fluids or gas in 45 deg or 90 deg,while reducing elbows also can reduce the flow in the piping system.Shanghai Zhucheng has experienced steel pipe fittings factory to supply high quality fittings.

5in SW elbow is used to socketed with pipes and then welded on pipes.ASME B16.11 pipe fittings mean forged pipe fittings.Forged pipe fittings can be divided in socket weld fittings and threaded fittings.

These concentric reducers are available in the seamless and welded type of construction. Concentric reducer is used to join pipe sections or tube sections on the same axis. It is cone-shaped, and is used when there is a shift in diameter between pipes. A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.

The function of an end cap is to block off the end of a line a piping system, This is achieved by placing the end cap over the open line and welding around the point.

45 deg elbow has three types:BW,SW,THD.Among these,The commonly used elbows can be 45 deg and 90 deg.BW (butt welded) 90 degree elbows have LR (long radius) and SR (short radius) while 45 degree elbows only have LR type.

Fittings that change direction in a piping system are called elbows which available in 90 degree and 45 degree long radius elbow. Both of them has the center line at 1.5 x NPS from elbow end.

BW equal tee is a commonly used tee in many applications.There is also reducing tees to choose.These tees have same functions,the only difference is the reducing tees can reduce the flow in the pipe system.There are the tee specifications in content below.

Carbon steel elbows are curved connecting pieces that join straight lengths of pipe, commonly at a 90° or 45° angle, allowing obstructions to be avoided in plumbing, ventilation, welding, and automotive applications.

12in concentric reducer is a normal size pipe fitting that can used for many applications.SCH 80 is a commonly used wall thickness for BW fittings.There are two types of reducer:concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

According to its radius of curvature, there are long radius elbow and short radius elbow. Long radius elbow refers to its radius of curvature is equal to 1.5 times the outside diameter of the pipe, that is, R=1.5D; A short radius elbow means that its radius of curvature is equal to the outer diameter of the pipe, that is, R= 1.0d.(D is the diameter of the elbow, and R is the radius of curvature).

Stainless steel pipe fittings including Tee,Cross, Elbow, Reducer, Coupling, Nipple, Plug & Cap,Union.They can be connected with pipes by welding, socket and thread.

A420 WPL6 tee is a pipe fitting with three ports, mainly used to divide a pipe into two branches or merge two branches into one pipe. Common ones are equal diameter tees and reducing tees. In the layout of the pipeline system, the structure of the tee can flexibly change the flow direction of the fluid to achieve the function of branching or merging.

Spiral wound gasket (SWG) is a fitting used with flanges.ASME B16.20 is the American Standard for gasket.

There are two types of tees:Equal Tee and Reducing Tee.Both types of tees can branches the pipes but reducing tees can also reduce the flow.Schedule 40 is a commonly used wall thickness in butt welded fittings.

Butt weld elbow is the most used type of elbows.It can welded with the pipes to achieve strong and permanent connection.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel fittings can used over 50 years.

Steel pipe bend two pipes into a certain angle and connects them together to change the direction of the pipe. it could be bend directly from a finished pipe with cold bending processes, to different degrees.

BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.There are the applications for eccentric reducer.

oncentric reducers are beneficial to use where different ratings and to wear protection is required in conveying between flanges or pipes.

BW elbow can welded with pipes to achieve strong and permanent connection.ASTM A234 WPB pipe fittings are the most popular carbon steel fittings.There is also has A234 WPC for carbon steel fittings.

BW equal tees are the most used tees in the all types of tees.There are equal tee and reducing tee.Galvanized carbon steel pipe fittings have better corrosion resistance than carbon steel fittings.

Carbon steel elbow has two degrees:90 deg and 45 deg.In real application,90 deg is more used type.90 deg elbow can be long radius (LR) and short radius (SR) while 45 deg elbow only has long radius (LR).

The length dimension of the reducer is almost equal to the average of the big bore and smaller bore pipe diameters. Concentric reducers are easy to transport mud and grinding fluid and are suitable for corrosive operations

Stainless concentric reducer is belong to BW (butt welded) fittings.Reducer can be two types:Concentric (COC) Reducer and Eccentric (ECC) Reducer.The main difference of these two typws are the internal structure.Stainless steel pipe fittings have better functions than other material pipe fittings.

Butt welded cap is a pipe fitting used to closed the piping systems.BW caps use welding connection to connect with the pipes.SCH 80 is a commonly used wall thickness of BW fittings,the other commonly used wall thickness is SCH 40.

Butt Weld Fittings are manufacture by seamless or welded pipe. For pipe fittings manufacturers, the forming process of welded pipe and seamless pipe is basically same. Butt welded fittings can be divided into carbon steel butt welded fittings and stainless-steel butt-welded fittings.

When the direction change angle of the single section of the miter elbow is greater than 45, it should not be used in the pipeline with toxic and combustible media, or in the pipeline subject to vibration, pressure pulsation and alternating load due to temperature change

An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 180° or 90° angle, though 45° elbows are also made. The ends may be machined for butt welding (SW) or socketed welding(SW) etc.