ASTM A234 WP9 Alloy Steel CONCENTRIC REDUCER BW B 16.9

Concentric reducers are beneficial to use where different ratings and to wear protection is required in conveying between flanges or pipes. nd the pipe is connected through conical transition section on the same axis.

A234 WPB/WPC BW 90 degree elbows are carbon steel butt welded fittings.Elbows also have 45 degree.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

Concentric reducer is used to join pipe sections or tube sections on the same axis. It is cone-shaped, and is used when there is a shift in diameter between pipes. A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.

How to use a BW tee in a pipesystem,what about its specification and advantages.

Take carbon steel buttweld fittings into a bath of molten zinc. That would get more zinc and make the price is high. We surfaced carbon steel forged fittings with electrogalvanizing because it is pretty and low cost.

It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter. Therefore, this kind of steel elbow is often used when space is not enough.A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. Available in many materials like silicon, rubber compounds, galvanized steel etc.

Spiral wound gasket (SWG) is a fitting used with flanges.ASME B16.20 is the American Standard for gasket.

A403 WP304  eccentric reducer is a pipe fitting used to connect pipes of different diameters, and the central axes do not overlap, which means there is an eccentricity. The eccentric reducer has two ends, one with a larger diameter and the other with a smaller diameter.

A234 WPB Carbon Steel Buttweld 90 Deg Elbow’s usage

45 deg elbow can change the direction of fluids or gas in 45 degree.There is also has 90 deg elbow to be chosen.45 degree elbow has many diffences with 90 degree elbow.All types of elbows can be Equal Tee and Reducing Tee to satisfy different demands.

3/4in BW tee is a normally used fitting in butt welded fittings.A403 WP321 is a grade for stainless steel.Stainless steel pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

The two ends of concentric reducer are designed with large diameter and small diameter, and the pipe is connected through conical transition section on the same axis.

Carbon steel reducer is a commonly used BW fitting.Butt welded pipe fittings used welded connection to connect with pipes in piping systems.These BW fittings are popular because of the strong and permanent connection.Carbon steel is the most used material in many applications because of the great functions and affordable price.

A pipe tee isuaually used in different industries,petroleum, natural gas, chemical, water and electricity, building and boiler industries.What’s the advantage ,how to choose a suitable tee ?

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

45 deg elbow is a type of elbows,there are also 90 deg elbows and 180 deg elbows.These elbows have similar functions,the main difference is the degree.Elbows can be BW,SW and THD to chosen for different applications.Shanghai Zhucheng is a quality pipe fittings supplier from China.

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

BW reducer can be concentric (COC) reducer and eccentric (ECC) reducer.The main difference is the internal structure.COC and ECC types reducers could meet different demands in many applications.You could find the summary “COC VS ECC” in the content below.

Butt weld elbow is the most used type of elbows.It can welded with the pipes to achieve strong and permanent connection.Stainless steel fittings are popular because of the an-ti corrosive function.Stainless steel fittings can used over 50 years.

Concentric reducers provide an in-line conical transition between pressurized pipes of different diameters. It is cone-shaped, and is used when there is a shift in diameter between pipes. 

Compared to 90 degree elbow, 45 degree elbow produces less friction, and with the lower pressure. 45 degree elbow is widely used in chemical industry, food, water supply facilities, electronic industry, chemical pipeline, horticulture, agricultural production, solar equipment pipeline, air conditioning pipeline and other fields.

According to its radius of curvature, it can be divided into long radius elbow and short radius elbow. Long radius elbow means that its radius of curvature is equal to 1.5 times the outer diameter of the pipe, that is, r = 1.5D. Short radius elbow means that its radius of curvature is equal to the outer diameter of the pipe, that is, r = 1.0d.

Concentric reducer is used to join pipe sections or tube sections on the same axis. It is cone-shaped, and is used when there is a shift in diameter between pipes. 

Concentric reducer’s dimnesions and its usage and advantage

According to fluid flow direction of the pipes, elbows can be divided into different degrees, such as 45 degree, 90 degree, 180 degree, which are most common elbows. Also there are 60 degree and 120 degree elbows for some special pipelines. This degree is just an representation of the angle by which the fluid flow is going to change after flowing through the said elbow.

Butt Welding Fittings Specification
Shape: Elbow, Tee, Cross, Bend, Reducer, Cap, Stub End
Size Range: 1/2″ – 80″ / DN15 – 2000
Thickness Schedule: SCH 10,SCH 10S, SCH 20, SCH 40,SCH 40S, STD, XS,SCH 80, SCH 80S, SCH 100, SCH 120, SCH 160, XXS
China Standard: GB/T12459, GB/T13401, HG/T21635/21631, SH3408/3409
America Standard: ANSI / ASME B16.9 / MSS SP 43
japan Standard: JIS B2311/2312/2313
Europe Standard: EN10253

BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.Stainless pipe fittings are popular because of the an-ti corrosive function.Stainless steel pipe fittings can used over 50 years.

Carbon steel elbows are curved connecting pieces that join straight lengths of pipe, commonly at a 90° or 45° angle, allowing obstructions to be avoided in plumbing, ventilation, welding, and automotive applications.