ASTM A234 BW 90 DEG ELBOW DN15-2000

Concentric reducer is used to join pipe sections or tube sections on the same axis The length dimension of the reducer is almost equal to the average of the big bore and smaller bore pipe diameters.

Butt weld elbow can be welded with the pipes in piping systems to change the direction of the fluids or gas.A860 WPHY60 is belong to pipeline steel material.These elbows can be 90 deg and 45 deg to transport the flow in different direction.

90 degree steel pipe elbow functioned to change fluid direction by 90 degree, so also named as vertical elbow. It is the common degree in all the pipeline systems and used most in all different degree of elbows

What is a CAP nipple and what about its specification and advantages.

Equal diameter tee, also known as straight tee, the branch diameter of the tee is the same as the pipe diameter of the tee. The three branches of tee have same diameters.

A pipe tee isuaually used in different industries,petroleum, natural gas, chemical, water and electricity, building and boiler industries.What’s the advantage ,how to choose a suitable tee ?

Concentric reducer is used to join pipe sections or tube sections on the same axis. It is cone-shaped, and is used when there is a shift in diameter between pipes. A pipe reducer is available in various specifications, such as a single diameter change and also in a multiple diameter change.

ASTM A234 WPB Eccentric Reducers are pipe fittings used to connect two pipes of different diameters, with the centerline of one pipe being offset from the other.

5in SW elbow is used to socketed with pipes and then welded on pipes.ASME B16.11 pipe fittings mean forged pipe fittings.Forged pipe fittings can be divided in socket weld fittings and threaded fittings.

The body of the branch abutment is made of high-quality forgings, which are made of the same materials as the pipes, including carbon steel, alloy steel, stainless steel, etc. The branch pipe seat and the main pipe are welded

Elbow is a pipe fitting that changes the direction of piping. According to the Angle, there are 45° and 90°180° three most commonly used. Elbow material can be divided into carbon steel, alloy steel and stainless-steel.

ASME B16.9 BW reducer used the most used standard for butt welded fittings.arbon steel fittings are used in many applications because of its great excellent functions.BW reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.

Butt welded reducers can be concentric (COC) reducer and eccentric (ECC) reducer.These reducers have same functions,the only difference is the internal structure.There are the BW fittings specifications in the content below.

In the layout of the pipeline system, long radius elbows should generally be used for connection, and short radius elbows are usually used in places where the installation position of the pipeline system is compact or to reduce costs

There are two types of tees:Equal Tee and Reducing Tee.Both types of tees can branches the pipes but reducing tees can also reduce the flow.Schedule 40 is a commonly used wall thickness in butt welded fittings.

A234 WPB/WPC BW 90 degree elbows are carbon steel butt welded fittings.Elbows also have 45 degree.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.

BW 90 degree elbow is the most commonly used type of elbows.There is also 45 deg elbow.These elbows have similar functions,the only difference is the 90 degree elbow can changes the direction in 90 deg while the 45 degree elbow can changes in 45deg.You could find the steel pipe elbow specifications in the connent below.

What is a straight and reducing tee and Dimensions and Standards

There are two types of 90 deg elbows:LR (long radius),SR (short radius).45 deg eblows are also have wide applications,be attention,45 deg elbow only have LR type.Butt welded pipe fittings have the most large used range as it can be 1/2″ – 80″.

45° Pipe Elbow is also known as “45 bends or 45 ells”. The 45° pipe elbow is used to connect tubes at a 45° pipe angle. As the name suggests, this is a pipe fitting device which is bent in such a way to produce 45° change in the direction of flow of the fluid/gas in the pipe.

LR 90 degree steel pipe elbow are installed between different lengths pipe or tubing. It helps to change direction at 90 degree, and is commonly used to connect hoses to pumps, deck drains and valve.SR 90 degree elbow is the same as the pipe elbow mentioned above, but the diameter is shorter. Therefore, this kind of steel elbow is often used when space is not enough.

Concentric reducer’s dimnesions and its usage and advantage

45 degree BW tee’s specification and advantages in pipe system.

Elbows are split into two groups which define the distance over which the flowing fluid change direction; the center line of one end to the opposite face. This is known as the “Center to Face” distance and is equivalent to the radius through which the elbow is bent.

Carbon steel tee is the most used type in all tees because carbon steel has great functions and affordable price.Galvanized pipe fittings has better anti-corrosive function than normal carbon steel pipe fittings,galvanized fittings have similar functions as stainless steel fittings,but the price is cheaper than stainless steel fittings.

Fittings that change direction in a piping system are called elbows which available in 90 degree and 45 degree long radius elbow. Both of them has the center line at 1.5 x NPS from elbow end.

SS 304/316 pipe tees are popular because these tees have excellent corrosion resistance.Tees can made for three types:BW (butt welded) tee,SW (socket weld) tee,THD (threaded) tee.Clients can choose different type of tees to satisfy different demands.ASME B 16.9 is represents butt welded fittings in American Standard.SW fittings and THD fittings are belong to forged fittings which marked as ASME B 16.11.